[THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- Weekend rebuild

  • From: "Tom Flanagan" <Tom.flanagan@xxxxxxxxxxxxxxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Sat, 15 Mar 2003 13:27:18 +0800

I am off John. we have install...I am only 2hrs behind schedule. thanks

-----Original Message-----
From: Rowlandson, John [mailto:John.Rowlandson@xxxxxxxxxxxxx]
Sent: Saturday, 15 March 2003 1:24 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent-
Weekend rebuild



Mallesons Stephen Jaques
www.mallesons.com

Confidential communication



there is no prompt but f6 works on NT4

just hit f6 repeatedly when you see blue.

John Rowlandson
Technical Support Specialist
Mallesons Stephen Jaques
Sydney
T +61 2 9296 3653
F +61 2 9296 3676
john.rowlandson@xxxxxxxxxxxxx


-----Original Message-----
From: Tom Flanagan [mailto:Tom.flanagan@xxxxxxxxxxxxxxxxxxxx]
Sent: Saturday, 15 March 2003 3:55 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent-
Weekend rebuild



jim/ chris

There is not an F6 prompt on an nt4.0 install.  "S" to specify is the =
=3D
=3D3D
method here.  If I try to proceed without "specifying" a device, the =
=3D3D
install does not continue.  I suppose it's been a while since anyone has =
=3D
=3D3D
done this NT stuff??  I really think it has some thing to do with the =
=3D
=3D3D
larger disks.  I know NT has boot partition constraints.  but I am not =
=3D
=3D3D
sure about physical disk constraints.???

anybody???

-----Original Message-----
From: Chris Lynch [mailto:lynch00@xxxxxxx]
Sent: Saturday, 15 March 2003 12:37 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent-
Weekend rebuild



=3D3D3D20
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You need to press F6 right when the blue screen appears (right when the =
=3D
=3D3D
=3D3D3D
CD starts loading).  If you have ever installed Windows 2000, you will =
=3D
=3D3D
=3D3D3D
notice that it states to press F6 to install a mass storage driver =
=3D3D3D
before the kernel loads.  This is the same location you would press F6.

Chris

- -----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On =
=3D
=3D3D
=3D3D3D
Behalf Of Jim Kenzig http://thethin.net
Sent: Friday, March 14, 2003 8:06 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: NT4.0 TSE install scsi problems - HELP Urgent- =
=3D3D3D
Weekend rebuild



Sounds like NT is already detecting the drives and you don't need to add =
=3D
=3D3D
=3D3D3D
the scsi drivers doesn't it? Did you try going through the install =
=3D3D3D
without that step? JK

- -----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On
Behalf Of Tom Flanagan
Sent: Friday, March 14, 2003 10:51 PM
To: 'Thin (E-mail)
Subject: [THIN] NT4.0 TSE install scsi problems - HELP Urgent- Weekend =
=3D
=3D3D
=3D3D3D
rebuild


Hi Everyone

Got a problem here.  I am reinstalling NT 4.0 tse onto newer hard =
=3D3D3D
drivers. 18GB scsi. (old ones were 9.0GBSCSI). I am using an NT 4.0 TSE =
=3D
=3D3D
=3D3D3D
sp3 install CD_rom.

When I get to the section where it says press S to specify another Mass =
=3D
=3D3D
=3D3D3D
storage device and put in your manufacturer diskette.  I do this. I =3D
=3D3D3D
select the Adaptec ultra 160 Scsi device and proceed.  ref: (My ScSi =3D
=3D3D3D
card at boot up says AIC 7899)

Next the install tells me it cannot see any hard drives. The hardrive =
=3D
=3D3D
=3D3D3D
are detected at startup though?

Is this because the HDD are too big.  Do I need to get hold of a NT4.0 =
=3D
=3D3D
=3D3D3D
TSE intall disk bundled with a later SPack?  HELP? PLEASE

Regards

Tom Flanagan
IT Network Administrator
Kailis & France Foods
Ph: +61 8 9273 6281
Mob: 0408 927 247
email: tom.flanagan@kailis-france.

*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity.=3D3D3D20
Get 30-40% more users per server to save $$$ and time.=3D3D3D20
Add users now! - not more servers. If you're using Citrix,=3D3D3D20
you must learn about TScale!  Free 30-day eval: =3D3D3D
http://www.rtosoft.com/Enter.asp?ID=3D3D3D3D79
**********************************************************

For Archives, to Unsubscribe, Subscribe or=3D3D3D20
set Digest or Vacation mode use the below link: =3D3D3D
http://thethin.net/citrixlist.cfm

-----BEGIN PGP SIGNATURE-----
Version: PGP 8.0
Comment: Public PGP key for Chris Lynch

iQA/AwUBPnKt+G9fg+xq5T3MEQJqTQCgo7h2VK0qZQTgA6dMRJ8mU5i9/74AnikX
vz4HYjrADQgK+1QnHGoTOhFT
=3D3D3D3DiybZ
-----END PGP SIGNATURE-----


*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity.=3D3D20
Get 30-40% more users per server to save $$$ and time.=3D3D20
Add users now! - not more servers. If you're using Citrix,=3D3D20
you must learn about TScale!  Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=3D3D3D79
**********************************************************

For Archives, to Unsubscribe, Subscribe or=3D3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity.=3D20
Get 30-40% more users per server to save $$$ and time.=3D20
Add users now! - not more servers. If you're using Citrix,=3D20
you must learn about TScale!  Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=3D3D79
**********************************************************

For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity.=20
Get 30-40% more users per server to save $$$ and time.=20
Add users now! - not more servers. If you're using Citrix,=20
you must learn about TScale!  Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=3D79
**********************************************************

For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity. 
Get 30-40% more users per server to save $$$ and time. 
Add users now! - not more servers. If you're using Citrix, 
you must learn about TScale!  Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=79
**********************************************************

For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm

Other related posts: