Wow...only been at it for around 15 years, but I find I NEED schematics. As a matter of fact ...I very seldom take in a TV if I don't have a schematic or have access to one. Working on TV's without service data is guess work. Part values are more critical today than they were years ago. Proper service data is necessary just to get the original part #. Tommy Herman Herman TV 250 School Ave SW Taylorsville, N.C. 28681 828-632-5322 Voice 828-632-3880 Fax hermantvr@xxxxxxxxxxxxx In a message dated 10/19/02 7:14:59 PM Eastern Daylight Time, dpanday@xxxxxxxxxxx writes: Stefaan, Experience will come with time, then you will be able to repair unit without schematics. Welcome and good luck. Panday >From: "al m" <ampm@xxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Re: for the record + repairing without a schematic? >Date: Sat, 19 Oct 2002 06:12:03 -0400 > > >Stefaan, once you're around long enough you won't need the scats for the >common problems. ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/