right Ed. but if i remember i order when i take out, next to the last one. lol Larry Edward Gaidies wrote: > Inventory Count???? > When I go to the drawer that holds my 10ufd/200V...and it's empty...I > order more.;-) > > > -Ed- > ***************************************************************** > Ed Gaidies > Tel-Tek Electronics > Ontario-Canada > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx > > On 10-Oct-04, at 12:40 AM, Gary McCartney wrote: > > >>I just write on the invoice, 50 caps at $1.00 ea or whatever. I don't >>get into the uF or voltage rating of each cap. How do you guys handle >>your inventory count if you mark down "MOD KIT" or something else? >> >> >> >> >>Gary McCartney >> >>McCartney Electronics >>Guelph Ontario Canada >>Est. 1984 >>email: gary (at) number63.ca >> >> >> >> >> >> >> >>Jay wrote: >> >>>If I have to itemize the parts list on the invoice then I have no >>>choice >>>but to raise the labor charges. Most want the repair done as cheap as >>>possible, and that means to me with the least effort possible. (-; >>>Jay Knoll >>>Jay's TV Service >>>www.circuitwork.com >>>Voice 304-624-6311 >>>Fax 208-246-5422 >>> >>>J Silverman wrote: >>> >>> >>>>Yeah. But it takes so long to write up the parts list. >>>>Jerry Silverman >>>>Greentron Inc >>>>4 Newland Ave >>>>Greenville SC 29609 >>>>Fax/Phone 864 232 3889 >>>>mail to: greentron@xxxxxxx >>>>----- Original Message ----- >>>>From: "Gary McCartney" <gary@xxxxxxxxxxx> >>>>To: <techassist@xxxxxxxxxxxxx> >>>>Sent: Saturday, October 09, 2004 3:17 PM >>>>Subject: [TechAssist] charges for capacitors installed in a set >>>> >>>> >>>> >>>> >>>> >>>>>Ed, that is interesting. Let's say you replace 50 caps in a >>>>>Mitsubishi. >>>>>How much would you charge for the so- called MOD KIT? Just wanting >>>>>to >>>>>know if that would be a big advantage over just charging for 50 >>>>>caps. >>>>>I've been charging for the caps. Nobody has questioned it or >>>>>anything. I >>>>>charge a buck for the small ones, and go up mostly as the voltage >>>>>rating >>>>>increases to 3, 4 or higher bucks each. >>>>> >>>>> >>>>> >>>>> >>>>>Gary McCartney >>>>> >>>>>McCartney Electronics >>>>>Guelph Ontario Canada >>>>>Est. 1984 >>>>>email: gary (at) number63.ca >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>Tel-Tek Electronics wrote: >>>>> >>>>> >>>>> >>>>>>Same here Al...I never use the word "fuse" on my Invoice..that's >>>>>>all the >>>>>>customer focuses on. >>>>>>Some of my customers that are a little technically inclined, or >>>>>>presume they are, I don't even use words like resistors or >>>>>>capacitors. >>>>>>Like on the Mitsubishi's...if I change a bunch of Caps, I bill >>>>>>it out as a MOD KIT, and charge accordingly. >>>>>> >>>>>>-Ed- >>>>>> >>>>>>Tel-Tek Electronics >>>>>>Ontario-Canada >>>>>> >>>>>>teltek3@xxxxxxxxxxxx >>>>>>teltek@xxxxxxxxx >>>>>> >>>>>> >>>>>>-----Original Message----- >>>>>>From: techassist-bounce@xxxxxxxxxxxxx >>>>>>[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Al L >>>>>>Sent: Saturday, October 09, 2004 10:36 AM >>>>>>To: techassist@xxxxxxxxxxxxx >>>>>>Subject: [TechAssist] Re: Fusible resistors >>>>>> >>>>>>Since fuses and fuse ohms cost very little i NEVER put them on my >>>>>>bills! >>>>>>It >>>>>>also stops that old crap'ALL it needed was a fuse!". al >>>>>> >>>>>>Al Leatherman >>>>>>224 RT. 46 >>>>>>Mine Hill, NJ 07803 >>>>>>973-361-5796 >>>>>>WWW.ALS-TV.NET >>>>>> >>>>>>----- Original Message ----- >>>>>>From: "Doug Keller" <dek@xxxxxxxxxxxxxx> >>>>>>To: <techassist@xxxxxxxxxxxxx> >>>>>>Sent: Saturday, October 09, 2004 5:34 AM >>>>>>Subject: [TechAssist] Re: Fusible resistors >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>Bingo! Give that man a cigar! As "sue-happy" as a lot of Americans >>>>>> >>>>>>have >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>become, it is best to use the original part when it comes to >>>>>>>something >>>>>>>like this. When you turn on a tv and there is a lawyer saying "Has >>>>>>>anyone looked at you cross-eyed in the last 3 months? We'll sue >>>>>>>on a >>>>>>>percentage basis", Ed is VERY correct in saying that a lawyer >>>>>>>would >>>>>> >>>>>>drag >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>you through the coals on that. >>>>>>> >>>>>>>Doug Keller >>>>>>>Wis-Kel Electronics >>>>>>>101 Freeland Ave. >>>>>>>Terra Alta, WV >>>>>>>USA 26764 >>>>>>>dek@xxxxxxxxxxxxxx >>>>>>>dek@xxxxxxxxxxxxxxx >>>>>>>http://www.tech-assist.org >>>>>>>"Learn from the mistakes of others, because you >>>>>>>won't live long enough to make them all yourself" >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>Edward Gaidies wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>Jerry; >>>>>>>>I agree 100%. >>>>>>>>Cover yourself on "Safety Components"... >>>>>>>>Not being cruel...it's nice to ask if you don't know..but using >>>>>>>>improper fuses, or improper components will put your shieska on >>>>>>>>the >>>>>>>>line. >>>>>>>> >>>>>>>>Not so much in Canada, but with Lawsuits, some hotshot >>>>>>>>Investigator >>>>>>>>will draw you through the coals. >>>>>>>> >>>>>>>> >>>>>>>>-Ed- >>>>>>>>***************************************************************** >>>>>>>>Ed Gaidies >>>>>>>>Tel-Tek Electronics >>>>>>>>Ontario-Canada >>>>>>>>teltek3@xxxxxxxxxxxx >>>>>>>>teltek@xxxxxxxxx >>>>>>>> >>>>>>>>On 8-Oct-04, at 3:47 PM, J Silverman wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>There is no relationship between fusible and flameproof. They >>>>>>>>>have >>>>>>>>>different >>>>>>>>>applications. Fusible has been selected to protect some circuit >>>>>>>>>from >>>>>>>>>further >>>>>>>>>damage. Flameproof is to prevent smoke and fire when damage >>>>>>>>>occurs. >>>>>>>>>Jerry Silverman >>>>>>>>>Greentron Inc >>>>>>>>>4 Newland Ave >>>>>>>>>Greenville SC 29609 >>>>>>>>>Fax/Phone 864 232 3889 >>>>>>>>>mail to: greentron@xxxxxxx >>>>>>>>>----- Original Message ----- >>>>>>>>>From: "Paul" <dntwntv@xxxxxxxxxxxxx> >>>>>>>>>To: <techassist@xxxxxxxxxxxxx> >>>>>>>>>Sent: Friday, October 08, 2004 2:06 PM >>>>>>>>>Subject: [TechAssist] Re: Fusible resistors >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>Thats interesting, because I am working on a Samsung that came >>>>>>>>>>in >>>>>>>>>>with a >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>vertical problem per the customer. Didn't show up in the shop >>>>>>>>>till I >>>>>>>>>tapped >>>>>>>>>the board. I resoldred all the i/c pins and other relative >>>>>> >>>>>>components. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>Still >>>>>>>>>no deflection. Hit the area with freeze and got partial >>>>>>>>>deflection >>>>>>>>>momentarily while a peaking coil smoked. I replaced the i/c the >>>>>>>>>coil >>>>>> >>>>>>a >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>shorted zener and a lytic cap. The 5.6 ohm fusible opened also >>>>>>>>>which >>>>>> >>>>>>I >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>didn't see till I fired it up again and had fold over. I >>>>>>>>>replaced >>>>>> >>>>>>with >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>a >>>>>>>>>flame proof. It smoked and opened up immediately. Found another >>>>>>>>>shorted >>>>>>>>>zener. Thus the reason for the question. A fusible didn't seem >>>>>>>>>to >>>>>> >>>>>>work >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>any >>>>>>>>>better than a flame proof, at least in this case. Some >>>>>>>>>suppliers use >>>>>>>>>the >>>>>>>>>term fusible to mean flame proof. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Paul >>>>>>>>>>J Silverman <greentron@xxxxxxx> wrote: >>>>>>>>>>No. A flame proof resistor is made of materials that wont burn >>>>>>>>>>or >>>>>>>>>>smoke >>>>>>>>>>excessively. That doesnt mean that it wont light up like a >>>>>>>>>>light >>>>>> >>>>>>bulb >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>while >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>the circuit it is supposed to protect vaporizes and the >>>>>>>>>>resistor >>>>>>>>>>survives. >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>A >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>fusable resistor is supposed to protect something by >>>>>>>>>>interrupting >>>>>> >>>>>>the >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>>current. >>>>>>>>>>Jerry Silverman >>>>>>>>>>Greentron Inc >>>>>>>>>>4 Newland Ave >>>>>>>>>>Greenville SC 29609 >>>>>>>>>>Fax/Phone 864 232 3889 >>>>>>>>>>mail to: greentron@xxxxxxx >>>>>>>>>>----- Original Message ----- >>>>>>>>>>From: "Paul" >>>>>>>>>>To: >>>>>>>>>>Sent: Thursday, October 07, 2004 9:57 PM >>>>>>>>>>Subject: [TechAssist] Fusible resistors >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>Is a flame proof resistor a safe sub for a fusible resistor >>>>>>>>>>>of the >>>>>>>>>>>same >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>value? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>If not why not? >>>>>>>>>>>Paul >>>>>>>>>>> >>>>>>>>>>>Paul ,B >>>>>>>>>>>Central TV&Video >>>>>>>>>>>911W Grand Ave >>>>>>>>>>>Grover Beach Ca. >>>>>>>>>>>(805)481-8084 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>> >>>>>>>>>---------------------------------------------------------------- >>>>>>>>>----- >>>>>> >>>>>>- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>>---- >>>>>>>>>>--- >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>Lost Password: >>>>>>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>>>>>Email Archives: >>>>>>>>>>>//www.freelists.org/archives/techassist/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>> >>>>>>>>>---------------------------------------------------------------- >>>>>>>>>----- >>>>>> >>>>>>- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>>---- >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>--- >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>Lost Password: >>>>>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>>>>Email Archives: >>>>>>>>>>//www.freelists.org/archives/techassist/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>Paul ,B >>>>>>>>>>Central TV&Video >>>>>>>>>>911W Grand Ave >>>>>>>>>>Grover Beach Ca. >>>>>>>>>>(805)481-8084 >>>>>>>>>> >>>>>>>>>> >>>>>>> >>>>>>>>>---------------------------------------------------------------- >>>>>>>>>----- >>>>>> >>>>>>- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>>---- >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>--- >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>Lost Password: >>>>>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>>>>Email Archives: >>>>>>>>>>//www.freelists.org/archives/techassist/ >>>>>>>>>> >>>>>>>>>> >>>>>>> >>>>>>>>----------------------------------------------------------------- >>>>>>>>----- >>>>>> >>>>>>- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>>------ >>>>>>>>>Lost Password: >>>>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>>>Email Archives: >>>>>>>>>//www.freelists.org/archives/techassist/ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>------------------------------------------------------------------ >>>>>>>----- >>>>>> >>>>>>---- >>>>>>-- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>Lost Password: >>>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>>Email Archives: >>>>>>>>//www.freelists.org/archives/techassist/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>------------------------------------------------------------------- >>>>>>----- >>>>>>-- >>>>>>--- >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>Lost Password: >>>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>>Email Archives: >>>>>>>//www.freelists.org/archives/techassist/ >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>>------------------------------------------------------------------- >>>>>>----- >>>>>>----- >>>>>>Lost Password: >>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>Email Archives: >>>>>>//www.freelists.org/archives/techassist/ >>>>>> >>>>>> >>>>> >>>>>-------------------------------------------------------------------- >>>>>------ >>>> >>>>--- >>>> >>>> >>>> >>>>>>Lost Password: >>>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>>Email Archives: >>>>>>//www.freelists.org/archives/techassist/ >>>>>> >>>>> >>>>> >>>>>-------------------------------------------------------------------- >>>>>------ >>>> >>>>--- >>>> >>>> >>>> >>>>>Lost Password: >>>>>http://www.tech-assist.org and select "Login Problems?". >>>>>Email Archives: >>>>>//www.freelists.org/archives/techassist/ >>>> >>>> >>>> >>>>--------------------------------------------------------------------- >>>>-------- >>>>Lost Password: >>>>http://www.tech-assist.org and select "Login Problems?". >>>>Email Archives: >>>>//www.freelists.org/archives/techassist/ >>>> >>> >>> >>>---------------------------------------------------------------------- >>>------- >>>Lost Password: >>>http://www.tech-assist.org and select "Login Problems?". >>>Email Archives: >>>//www.freelists.org/archives/techassist/ >>> >> >> >>----------------------------------------------------------------------- >>------ >>Lost Password: >>http://www.tech-assist.org and select "Login Problems?". >>Email Archives: >>//www.freelists.org/archives/techassist/ >> > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > -- Schneider TV & Electronic Inc. 5415 N. Wooster ave. Dover, Ohio 44622 www.geocities.com/schntv2000/ 330-343-0768 FCC. first class & Extra class K8WLY ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/