[TechAssist] Re: Sony LCD proj. KF-50WE610 (no chassis) no power
- From: Wayne Vanaman <Wayne@xxxxxxxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 10 Mar 2005 13:18:07 -0600
Actually, as of 1315CST 10 Mar 2005, the resistor mod is still on the
web site, bulletin e23621118 for KF42we610, sn 9000001-9101415,
KF50we610 sn 9000001-9106059 and kf60we610 sn 9000001-9103432.
I neglectied a very important asspect of this in my post, and that has
to do with the serial numbers.
Even though the current production has been corrected this does not
correct the sets in the field.
The key, again is the serial numbers.
One of the main advantages of this list is that the people that have
access to the manufacturers information are willing to share.
Wayne Vanaman
Omega Electronics
6904 W Fairfield Dr
Pensacola, Fl. 32506-3310
Wayne@xxxxxxxxxxxxxxxxxxxxx
WWW.PensacolaTVRepair.Com
850-456-5995 voice
850-458-6369 fax
Jeff Farnsworth wrote:
> The sony bulletin with the smd replacement is ancient history-----it has
> been superceded many times. Do NOT replace any smd's per old sony bulletins
>
> TV Doctor
> Avalon, Wi
>
> ----- Original Message -----
> From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, March 09, 2005 4:26 PM
> Subject: [TechAssist] Re: Sony LCD proj. KF-50WE610 (no chassis) no power
>
>
>
>>Don NOT ONLY replace the lamp, replace the Ballast, too.
>>
>>Sony bulletin. There May also be an SMD resistor to change down on
>>another board.
>>
>>Wayne Vanaman
>>Omega Electronics
>>6904 W Fairfield Dr
>>Pensacola, Fl. 32506-3310
>>
>>Wayne@xxxxxxxxxxxxxxxxxxxxx
>>WWW.PensacolaTVRepair.Com
>>
>>850-456-5995 voice
>>850-458-6369 fax
>>
>>
>>tvservice wrote:
>>
>>>Replace the lamp
>>>Robert
>>>tvservice@xxxxxxxxxxxxx
>>>H & H Electronics Inc
>>>
>>>----- Original Message -----
>>>From: <BOSS1996@xxxxxxx>
>>>To: <techassist@xxxxxxxxxxxxx>
>>>Sent: Wednesday, March 09, 2005 1:34 PM
>>>Subject: [TechAssist] Sony LCD proj. KF-50WE610 (no chassis) no power
>>>
>>>
>>>
>>>
>>>>Haven't seen this one before. Power LED goes on (green) but blinks
>>>>continuously. Looking in back of set I see some kind of spark gap that
>>>
>>>will arc for a
>>>
>>>
>>>>short time. I'm thinking a lamp is out, anyone have any suggestions?
>>>>
>>>>
>>>>
>>>>Robert Cardoza
>>>>Picture Perfect Elec.
>>>>9940 NW 6th Ct
>>>>Pembroke Pines, Fla, 33024
>>>>954-435-5868
>>>>
>>
>>>--------------------------------------------------------------------------
>>>
>>>---
>>>
>>>
>>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>>Email Archives: //www.freelists.org/archives/techassist/
>>>>
>>>
>>>
>>>
>>--------------------------------------------------------------------------
>
> ---
>
>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>Email Archives: //www.freelists.org/archives/techassist/
>>>
>>>
>>
>>--------------------------------------------------------------------------
>
> ---
>
>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>Email Archives: //www.freelists.org/archives/techassist/
>>
>>
>
>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
