Disconnect the HOT and load the power supply with a 60 watt bulb and measure the voltage to see if the supply is regulating. Al G STERLING PASHER wrote: > Anyone got any not notes on why this one won't start. Or should I say won't > bring up horz.. There is 157V to the STR30130 on pin 3 when power is pressed > and 156v on H/O . I don't think I'm getting regulation out of STR. I have > replaced the STR checked all diodes, resistors and caps in the circuit but > can find nothing wrong. It seems to me I ran into this before, but can't > remember fix > . > Buck Pasher > Buck's TV > Gander Newfoundland > Canada > 709-256-7738 (Fax & Phone) > > > > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/