Al : That was good idea. Put on 60 watt bulb and the B+ went to 130V as it should be. Thanks for the tip. Buck Pasher Buck's TV Gander Newfoundland Canada 709-256-7738 (Fax & Phone) ----- Original Message ----- From: "Al Gutz" <alg@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 03, 2005 11:37 PM Subject: [TechAssist] Re: Hitachi 26AX10BC (Canadian model ) Chassis M1CLXU > Disconnect the HOT and load the power supply with a 60 watt bulb and > measure the voltage to see if the supply is regulating. > > Al G > > STERLING PASHER wrote: > > Anyone got any not notes on why this one won't start. Or should I say won't > > bring up horz.. There is 157V to the STR30130 on pin 3 when power is pressed > > and 156v on H/O . I don't think I'm getting regulation out of STR. I have > > replaced the STR checked all diodes, resistors and caps in the circuit but > > can find nothing wrong. It seems to me I ran into this before, but can't > > remember fix > > . > > Buck Pasher > > Buck's TV > > Gander Newfoundland > > Canada > > 709-256-7738 (Fax & Phone) > > > > > > > > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/04 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/05 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/