[TechAssist] Re: Hitachi 26AX10BC (Canadian model ) Chassis M1CLXU
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 4 Jan 2005 22:32:19 -0500
Did you also sea4rch using the chassis number?
Symptom: DEAD
Cause: REPLACE Q921; T921; T701
Symptom: DEAD
Cause: REPLACE Q921, T921 AND T701
Symptom: NO POWER; RELAY CLICKS
Cause: CHECK C952; D952
These are some tips.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "STERLING PASHER" <spasher@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 04, 2005 10:40 AM
Subject: [TechAssist] Re: Hitachi 26AX10BC (Canadian model ) Chassis M1CLXU
Bruce thanks for info. I already got the schematic from
www.Hitachiserviceusa.com . but there isn't a trouble shooting guide there.
Buck's TV
Gander Newfoundland
Canada
709-256-7738 (Fax & Phone)
----- Original Message -----
From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 04, 2005 9:50 AM
Subject: [TechAssist] Re: Hitachi 26AX10BC (Canadian model ) Chassis M1CLXU
> There is probably a trouble shooting guide there. It could be one of your
> stand by or run supplies. Had a similar problem and systematically checked
> all the supply voltages until I found the right one. I will include the
URL
> for Hitachi.
> http://www.hitachiserviceusa.com/
> Bruce.
>
> B&T Electronics
> 139 Margaret St
> Sarnia Ontario
> Canada
> N7T 2Y3
> 519 344 1850
>
> ----- Original Message -----
> From: "STERLING PASHER" <spasher@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, January 03, 2005 7:35 PM
> Subject: [TechAssist] Hitachi 26AX10BC (Canadian model ) Chassis M1CLXU
>
>
> > Anyone got any not notes on why this one won't start. Or should I say
> won't
> > bring up horz.. There is 157V to the STR30130 on pin 3 when power is
> pressed
> > and 156v on H/O . I don't think I'm getting regulation out of STR. I
have
> > replaced the STR checked all diodes, resistors and caps in the circuit
> but
> > can find nothing wrong. It seems to me I ran into this before, but can't
> > remember fix
> > .
> > Buck Pasher
> > Buck's TV
> > Gander Newfoundland
> > Canada
> > 709-256-7738 (Fax & Phone)
> >
> >
> >
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/04
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/04
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/04
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
