You missed some fluid. Remove the micro and the chipper check plug next to the EPROM. Clean under them and clean IC and plug before reinstalling. Make a drip shield to prevent future issues. ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ======================== ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 03, 2005 1:57 PM Subject: [TechAssist] RCA PTK195....Chassis CTC195 > Group; > Been slugging at this set before the new year...Used to be intermittent > shutdown. Now it's complete shutdown. One day it ran for the whole day > and night. Does anyone have a Troubleshooting Chart for these. > Originally I found some fluid that leaked onto the eprom. I cleaned > it..removed the eprom..installed socket...after that it worked great. > There was minimal leak on the board..but it was worst around the eprom. > So I guess a troubleshooting chart would be the next step. > > Thanks. > > -Ed- > > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx > > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/