Acetone does a clean fairly quick removal after it softens.
Gary W
I see you haven't yet gotten the gunk (tape residue?) off your fins.
It took me over an hour to clean it all off. I tried a bunch of things to try
to clean it off including Goo-Gone, IPA, Mineral spirits and lacquer thinner.
The only thing I found that even kind of cut it was WD-40. Still had to use
some Scottch Bright to get some of it off. Of course then I had to scrub them
all with Dawn and rinse them in IPA.
But they look pretty and clean now. Too bad I'm going to scuff then up, put a
couple layers of CF over them, and stuff them in a vacuum bag. But hey, no
lumps. :-)
Steve
Sent from XFINITY Connect Application
-----Original Message-----
From: kf6jbg@xxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-09 10:17:08 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!
Gary Walker
Tripoli Central CA
TRA # 9273 - L3
On April 9, 2018 at 10:28 PM srkendal@xxxxxxxxxxx wrote:
Here is a photo with motor tube installed. The fins need to be ground
down to fit into slots. Having a grinder with a flappy type grinding disk
sure helped in getting it to fit the slots. It got dark so I could not take a
photo of the fins installed. I only got 9 out of 12 fillets epoxied inside
the body to motor tube/fins today. Larry Taylor
Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for Windows ;
10
From: James Dougherty mailto:jafrado@xxxxxxxxx
Sent: Tuesday, March 27, 2018 12:03 AM
To: ROC Chat mailto:roc-chat@xxxxxxxxxxxxx
Cc: TCC chat mailto:tccrockets@xxxxxxxxxxxxx ; Richard King ;
mailto:drrbk@xxxxxxxxxxx ; aeropac@xxxxxxxxxxxxx mailto:aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!
Yeah, I wish. Too short a burn. My Little dog is almost the same rocket
and it barely touchs 3400' AGL with that load :(
Thats a painted finish (2K urethane). At least, it was :-)
On Mon, Mar 26, 2018 at 11:55 PM, Ron McGough <rrmagoo7@xxxxxxxxxxx
mailto:rrmagoo7@xxxxxxxxxxx ;> wrote:
> >
Hey James,
I think that you forgot a "0" after the "3". I think the K2045 has
a little more oomph than 3K in a 6 pound rocket. Lol
Ron McGough
Sent from my Galaxy Tab A
-------- Original message --------
From: James Dougherty <jafrado@xxxxxxxxx mailto:jafrado@xxxxxxxxx ;>
Date: 3/26/18 11:16 PM (GMT-08:00)
To: TCC chat <tccrockets@xxxxxxxxxxxxx
mailto:tccrockets@xxxxxxxxxxxxx ;>
Cc: Richard King <drrbk@xxxxxxxxxxx mailto:drrbk@xxxxxxxxxxx ;>, ROC
Chat <roc-chat@xxxxxxxxxxxxx mailto:roc-chat@xxxxxxxxxxxxx ;>,
aeropac@xxxxxxxxxxxxx mailto:aeropac@xxxxxxxxxxxxx
Subject: [roc-chat] Re: [tccrockets] Re: LDRS37 Kit Special
Available!
Here's the RASAero and Rocksim files.
It's about a 6lb rocket loaded with a K2045 and will do about 3K.
CP is optimal at 30" from the nose. It will need about 4 oz of mass
up front;
I plan to put electronics (MARSA) and some Lipos up there.
I'm thinking 40' mylar streamer drogue.
On Thu, Mar 15, 2018 at 4:34 AM, JAMES FRANCO <ALDOCYBER3@xxxxxxx
mailto:ALDOCYBER3@xxxxxxx ;> wrote:
> > >
Got my decal… don’t know what I am going to put it on. LOL
Get them while you can guys and gals, there is only going to
be one LDRS 37 TCC
Jimmy F.
Tripoli Rocketry Association
Member 12524
Level 3
From: tccrockets-bounce@xxxxxxxxxxxxx
mailto:tccrockets-bounce@xxxxxxxxxxxxx ;
[mailto:tccrockets-bounce@xxxxxxxxxxxxx ;
mailto:tccrockets-bounce@xxxxxxxxxxxxx ] On Behalf Of James Dougherty
Sent: Wednesday, March 14, 2018 6:53 PM
To: TCC chat <tccrockets@xxxxxxxxxxxxx
mailto:tccrockets@xxxxxxxxxxxxx ;>
Cc: Richard King <drrbk@xxxxxxxxxxx mailto:drrbk@xxxxxxxxxxx ;
; ROC Chat <roc-chat@xxxxxxxxxxxxx mailto:roc-chat@xxxxxxxxxxxxx ;>;aeropac@xxxxxxxxxxxxx mailto:aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] Re: LDRS37 Kit Special Available!
Decal available here -
http://stickershock23.com/product/ldrs-xxxvii/
Still more available, get them while you can - this is a
great deal!
On Wed, Mar 14, 2018 at 3:00 PM, James Dougherty
<jafrado@xxxxxxxxx mailto:jafrado@xxxxxxxxx ;> wrote:
> > > >
OMG - you and Motta need to have a party :-)
Mike told me that the pallet from Curtis is on it's way
and he's getting the nosecone tips next; should ship soon! More on this
later ...
On Wed, Mar 14, 2018 at 1:52 PM, aaron hagadorn
<hagadornclassics@xxxxxxxxx mailto:hagadornclassics@xxxxxxxxx ;> wrote:
> > > > >
Have not got mine yet but that's a good thing my
rocket build room/ammo reloading/Aaron's getaway room almost went up
in flames. Work out of town for month and the wiring in the walls
shorts out. Go figure now it's repair wiring and build rockets
Aaron Hagadorn
On Mar 13, 2018 10:14 PM, <srkendal@xxxxxxxxxxx
mailto:srkendal@xxxxxxxxxxx ;> wrote:
> > > > > >
My order says "Awaiting fulfillment".> > > >
Steve
Sent from XFINITY Connect Application
-----Original Message-----
From: drrbk@xxxxxxxxxxx
mailto:drrbk@xxxxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
mailto:tccrockets@xxxxxxxxxxxxx , roc-chat@xxxxxxxxxxxxx ;
mailto:roc-chat@xxxxxxxxxxxxx , aeropac@xxxxxxxxxxxxx ;
mailto:aeropac@xxxxxxxxxxxxx
Sent: 2018-03-13 9:21:30 PM
Subject: [tccrockets] Re: LDRS37 Kit
Special Available!
Anyone received theirs?
RK
From: James Dougherty
Sent: Wednesday, February 28, 2018 9:11 PM
To: TCC chat ; ROC Chat ;
aeropac@xxxxxxxxxxxxx mailto:aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] LDRS37 Kit Special
Available!
Hi Folks,
LDRS37 Kit special - the Avalanche from
Madcow Rocketry!
Only 100 of these kits are available so
order now!
https://www.madcowrocketry.com/3-avalanche
Thank you!
-James
[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon
Virus-free. www.avast.com
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link
> > > > >
> > >
> >
>