[tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!

  • From: James Dougherty <jafrado@xxxxxxxxx>
  • To: TCC chat <tccrockets@xxxxxxxxxxxxx>
  • Date: Tue, 10 Apr 2018 16:56:36 -0700

yes. I will have to find the ones which are stainless ... will send you the
part.


On Tue, Apr 10, 2018 at 4:53 PM, <srkendal@xxxxxxxxxxx> wrote:

Cool. Easy peaszy.


Sent from XFINITY Connect Application


-----Original Message-----

From: jafrado@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-10 4:51:23 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!

Yep, that's what I plan to do. Reminds me I need to order more McMaster
stuff...


On Tue, Apr 10, 2018 at 4:44 PM, <srkendal@xxxxxxxxxxx> wrote:

Thanks, that's exactly how I figured it worked.

One question, how are folks attaching to the nose cone? I figured I'd
just replace the screw with a welded eye bolt and a nut or two. Is there a
better way y'all are using?

Steve

Sent from XFINITY Connect Application


-----Original Message-----

From: jafrado@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-10 4:36:44 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!

Yes. One note, Mike Stoop just posted on how to build the HED setup for
those that wonder.
See the FAQ on the Madcow website.


On Tue, Apr 10, 2018 at 3:47 PM, <srkendal@xxxxxxxxxxx> wrote:

Yeah, that sort of was the starting point of the thread.

Steve


Sent from XFINITY Connect Application


-----Original Message-----

From: chrisattebery1971@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-10 3:36:24 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!

Isn't this kit set up for HED? I've built a couple HED rockets and IMHO
they work really well if you build them as designed. You don't need no
stinkin' AARD, chute release, or cable cutter.

If you're using a altimeter with a tracker you can put the antenna in an
RC car antenna tube and run it along the side of the main in the nose cone.

Here's a thread with the method I've followed:
http://www.rocketryforum.com/showthread.php?120615-CJ-s-quot
-PUNISHER-quot-build



On Tue, Apr 10, 2018 at 3:17 PM <srkendal@xxxxxxxxxxx> wrote:

I used an ARRD before, and it worked perfectly. Then I bought the
second generation, and it let go early on me.

But the original was awesome.

Steve


Sent from XFINITY Connect Application


-----Original Message-----

From: jafrado@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Cc: srkendal@xxxxxxxxxxx
Sent: 2018-04-10 3:12:53 PM
Subject: Re: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!

So the ARRD I have used before, I also used the breakwire thing jimmy
turned me onto - don't remember what it is called, in my garage.

I'm thinking 20' of kevlar, and this mylar streamer all wrapped up in a
Nomex...https://www.homedepot.com/p/Bird-B-Gone-Holographic-
Flash-Tape-Bird-Deterrent-150-ft-x-2-in-MMAFT-SIL/206044654
Imagine that thing re-entering from 5-10K :-)

Anyhow, cheap and easy fast up and down.

You know we have a points system for this race :-)







On Tue, Apr 10, 2018 at 2:59 PM, fetchen <fetchen@xxxxxxxxx> wrote:

Yes, reliability is my biggest concern using a tether device.  My
thought is to use multi-strand wire from the ebay to the tether device
taped to the shock cord, and then solder and heat shrink the e-match leads
to the multi-strand wire where they will not flex.  I plan on using a
deployment bag to minimize flapping – but it is still going to flap no
matter what.



I also looked at the Jolley Logic Chute Release, as it is all
self-contained.  But it looks a little small for this application.  It 
uses
a rubber bands to wrap the chute, and does not look like it would work in 
a
configuration where a drogue is deployed first, which then pulls the
deployment bag off when the tether is released to deploy the main.



Anyone with experience with this vs a traditional tether device?



Tom Fetter



*From:* srkendal@xxxxxxxxxxx <srkendal@xxxxxxxxxxx>
*Sent:* Tuesday, April 10, 2018 1:16 PM
*To:* fetchen@xxxxxxxxx
*Subject:* Re: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!



Hi Tom,

I have something that came from Defy Gravity. I don't remember what it
was called. It uses an e-match to separate two haves that hold cable 
loops.

My concern is that this piece of machined aluminum and my parachute
are flapping in the breeze with an attached piece of e-match wire. I've 
had
it break before. Even if you tape it up to the shock cord with stain
reliefs, that solid core wire can break from excessive flexures.

How do you keep it together and reliable?

Thanks!
Steve


Sent from XFINITY Connect Application


-----Original Message-----

From: fetchen@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-10 12:45:19 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!

I am plan on deploying both the drogue and main out of the main body,
using a Tender Descender (never used one before)  to release the main.  
The
method Mike Stoop describes sounds very interesting – one of those “I 
never
would have thought of doing it that way” – but  I like to reserve the
nosecone space for my Beeline GPS and other flight tracking electronics.
Using the main body for both main and drogue, I can definitely fit a 54mm
K550, and maybe even a K700 – or maybe not. I am using an Aero Pack 
54mm-3”
conical motor retainer, so that moves the motor a little aft, and I plan 
on
shortening the eBay tube from 7” to 5 or 6”, which will give a little more
space for motor and chutes.



Tom Fetter



*From:* tccrockets-bounce@xxxxxxxxxxxxx <tccrockets-bounce@freelists.o
rg> *On Behalf Of *srkendal@xxxxxxxxxxx
*Sent:* Tuesday, April 10, 2018 9:57 AM
*To:* gary-walker@xxxxxxxxxxx; tccrockets@xxxxxxxxxxxxx;
kf6jbg@xxxxxxx
*Subject:* [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!



I used some (previously used) lacquer thinner, which contains acetone.
But it was a later choice. Perhaps the oils I used (mineral spirits, 
WD-40)
inhibited it somewhat. I ultimately used a card scraper and that WD-40. It
worked. But as mentioned, I had to further scrub the crap out of them to
get all THAT off.


In the end, they look great, but as also mentioned, I intend to do a
carbon fiber lay up, so they're getting totally scuffed up anyway before I
do that.

BTW, it was pretty hard to get that stack of fins apart initially. No
match for my 1" chisel, but still. But I guess they need to keep them
together to rout them out. (I assume they use a CNC router to cut them 
out.)

The rest of the kit is fine. I did have to open the fin slots just a
bit (much too tight) but that's typical.

I do have a question for the list: if attempting to do dual
deployment, is anyone attempting to pack the main in the nose cone? Or are
you planning to use something like a jolly logic chute release and pop it
all out at the top? There looks to be enough room in the N/C for a main,
but it will be a fairly tight fit. Plus, I'll need to replace the screw
holding the tip on the N/C with an eye-bolt.

Just wondering if you were expecting to simply chase it down or try to
bring it down dual.

Thanks.
Steve



Sent from XFINITY Connect Application


-----Original Message-----

From: gary-walker@xxxxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx, kf6jbg@xxxxxxx, srkendal@xxxxxxxxxxx
Sent: 2018-04-10 8:32:07 AM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!

Acetone does a clean fairly quick removal after it softens.

Gary W













I see you haven't yet gotten the gunk (tape residue?) off your fins.

It took me over an hour to clean it all off. I tried a bunch of things
to try to clean it off including Goo-Gone, IPA, Mineral spirits and 
lacquer
thinner. The only thing I found that even kind of cut it was WD-40. Still
had to use some Scottch Bright to get some of it off. Of course then I had
to scrub them all with Dawn and rinse them in IPA.

But they look pretty and clean now. Too bad I'm going to scuff then
up, put a couple layers of CF over them, and stuff them in a vacuum bag.
But hey, no lumps. :-)

Steve


Sent from XFINITY Connect Application


-----Original Message-----

From: kf6jbg@xxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Sent: 2018-04-09 10:17:08 PM
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!

Gary Walker

Tripoli Central CA

TRA # 9273 - L3

On April 9, 2018 at 10:28 PM srkendal@xxxxxxxxxxx wrote:

Here is a photo with motor tube installed. The fins need to be ground
down to fit into slots. Having a grinder with a flappy type grinding disk
sure helped in getting it to fit the slots. It got dark so I could not 
take
a photo of the fins installed. I only got 9 out of 12 fillets epoxied
inside the body to motor tube/fins today. Larry Taylor



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10



*From: *James Dougherty <jafrado@xxxxxxxxx>
*Sent: *Tuesday, March 27, 2018 12:03 AM
*To: *ROC Chat <roc-chat@xxxxxxxxxxxxx>
*Cc: *TCC chat <tccrockets@xxxxxxxxxxxxx>; Richard King
<drrbk@xxxxxxxxxxx>; aeropac@xxxxxxxxxxxxx
*Subject: *[tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special
Available!



Yeah, I wish. Too short a burn. My Little dog is almost the same
rocket and it barely touchs 3400' AGL with that load :(

Thats a painted finish (2K urethane). At least, it was :-)



On Mon, Mar 26, 2018 at 11:55 PM, Ron McGough <rrmagoo7@xxxxxxxxxxx>
wrote:

Hey James,

I think that you forgot a "0" after the "3". I think the K2045 has a
little more oomph than 3K in a 6 pound rocket. Lol



Ron McGough





Sent from my Galaxy Tab A



-------- Original message --------

From: James Dougherty <jafrado@xxxxxxxxx>

Date: 3/26/18 11:16 PM (GMT-08:00)

To: TCC chat <tccrockets@xxxxxxxxxxxxx>

Cc: Richard King <drrbk@xxxxxxxxxxx>, ROC Chat <roc-chat@xxxxxxxxxxxxx>,
aeropac@xxxxxxxxxxxxx

Subject: [roc-chat] Re: [tccrockets] Re: LDRS37 Kit Special Available!



Here's the RASAero and Rocksim files.



It's about a 6lb rocket loaded with a K2045 and will do about 3K.

CP is optimal at 30" from the nose. It will need about 4 oz of mass up
front;

I plan to put electronics (MARSA) and some Lipos up there.

I'm thinking 40' mylar streamer drogue.







On Thu, Mar 15, 2018 at 4:34 AM, JAMES FRANCO <ALDOCYBER3@xxxxxxx>
wrote:

Got my decal… don’t know what I am going to put it on.  LOL



Get them while you can guys and gals, there is only going to be one
LDRS 37 TCC







Jimmy F.

Tripoli Rocketry Association

Member 12524

Level 3





*From:* tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@free
lists.org] *On Behalf Of *James Dougherty
*Sent:* Wednesday, March 14, 2018 6:53 PM
*To:* TCC chat <tccrockets@xxxxxxxxxxxxx>
*Cc:* Richard King <drrbk@xxxxxxxxxxx>; ROC Chat <
roc-chat@xxxxxxxxxxxxx>; aeropac@xxxxxxxxxxxxx


*Subject:* [tccrockets] Re: LDRS37 Kit Special Available!



Decal available here - http://stickershock23.com/product/ldrs-xxxvii/

Still more available, get them while you can - this is a great deal!





On Wed, Mar 14, 2018 at 3:00 PM, James Dougherty <jafrado@xxxxxxxxx>
wrote:

OMG - you and Motta need to have a party :-)
Mike told me that the pallet from Curtis is on it's way and he's
getting the nosecone tips next; should ship soon! More on this later ...





On Wed, Mar 14, 2018 at 1:52 PM, aaron hagadorn <
hagadornclassics@xxxxxxxxx> wrote:

Have not got mine yet but that's a good thing my rocket build
room/ammo reloading/Aaron's getaway room almost went up in flames. Work 
out
of town for month and the wiring in the walls shorts out. Go figure now
it's repair wiring and build rockets



Aaron Hagadorn



On Mar 13, 2018 10:14 PM, <srkendal@xxxxxxxxxxx> wrote:

My order says "Awaiting fulfillment".

Steve


Sent from XFINITY Connect Application


-----Original Message-----

From: drrbk@xxxxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx, roc-chat@xxxxxxxxxxxxx,
aeropac@xxxxxxxxxxxxx
Sent: 2018-03-13 9:21:30 PM
Subject: [tccrockets] Re: LDRS37 Kit Special Available!

Anyone received theirs?



RK







*From:* James Dougherty

*Sent:* Wednesday, February 28, 2018 9:11 PM

*To:* TCC chat ; ROC Chat ; aeropac@xxxxxxxxxxxxx

*Subject:* [tccrockets] LDRS37 Kit Special Available!



Hi Folks,

LDRS37 Kit special - the Avalanche from Madcow Rocketry!

Only 100 of these kits are available so order now!

https://www.madcowrocketry.com/3-avalanche

Thank you!

-James







[image:
https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>


































Other related posts: