Here is a photo with motor tube installed. The fins need to be ground down to
fit into slots. Having a grinder with a flappy type grinding disk sure helped
in getting it to fit the slots. It got dark so I could not take a photo of the
fins installed. I only got 9 out of 12 fillets epoxied inside the body to motor
tube/fins today. Larry Taylor
Sent from Mail for Windows 10
From: James Dougherty
Sent: Tuesday, March 27, 2018 12:03 AM
To: ROC Chat
Cc: TCC chat; Richard King; aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] Re: [roc-chat] Re: Re: LDRS37 Kit Special Available!
Yeah, I wish. Too short a burn. My Little dog is almost the same rocket and it
barely touchs 3400' AGL with that load :(
Thats a painted finish (2K urethane). At least, it was :-)
On Mon, Mar 26, 2018 at 11:55 PM, Ron McGough <rrmagoo7@xxxxxxxxxxx> wrote:
Hey James,
I think that you forgot a "0" after the "3". I think the K2045 has a little
more oomph than 3K in a 6 pound rocket. Lol
Ron McGough
Sent from my Galaxy Tab A
-------- Original message --------
From: James Dougherty <jafrado@xxxxxxxxx>
Date: 3/26/18 11:16 PM (GMT-08:00)
To: TCC chat <tccrockets@xxxxxxxxxxxxx>
Cc: Richard King <drrbk@xxxxxxxxxxx>, ROC Chat <roc-chat@xxxxxxxxxxxxx>,
aeropac@xxxxxxxxxxxxx
Subject: [roc-chat] Re: [tccrockets] Re: LDRS37 Kit Special Available!
Here's the RASAero and Rocksim files.
It's about a 6lb rocket loaded with a K2045 and will do about 3K.
CP is optimal at 30" from the nose. It will need about 4 oz of mass up front;
I plan to put electronics (MARSA) and some Lipos up there.
I'm thinking 40' mylar streamer drogue.
On Thu, Mar 15, 2018 at 4:34 AM, JAMES FRANCO <ALDOCYBER3@xxxxxxx> wrote:
Got my decal… don’t know what I am going to put it on. LOL
Get them while you can guys and gals, there is only going to be one LDRS 37 TCC
Jimmy F.
Tripoli Rocketry Association
Member 12524
Level 3
From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] ;
On Behalf Of James Dougherty
Sent: Wednesday, March 14, 2018 6:53 PM
To: TCC chat <tccrockets@xxxxxxxxxxxxx>
Cc: Richard King <drrbk@xxxxxxxxxxx>; ROC Chat <roc-chat@xxxxxxxxxxxxx>;
aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] Re: LDRS37 Kit Special Available!
Decal available here - http://stickershock23.com/product/ldrs-xxxvii/
Still more available, get them while you can - this is a great deal!
On Wed, Mar 14, 2018 at 3:00 PM, James Dougherty <jafrado@xxxxxxxxx> wrote:
OMG - you and Motta need to have a party :-)
Mike told me that the pallet from Curtis is on it's way and he's getting the
nosecone tips next; should ship soon! More on this later ...
On Wed, Mar 14, 2018 at 1:52 PM, aaron hagadorn <hagadornclassics@xxxxxxxxx>
wrote:
Have not got mine yet but that's a good thing my rocket build room/ammo
reloading/Aaron's getaway room almost went up in flames. Work out of town for
month and the wiring in the walls shorts out. Go figure now it's repair wiring
and build rockets
Aaron Hagadorn
On Mar 13, 2018 10:14 PM, <srkendal@xxxxxxxxxxx> wrote:
My order says "Awaiting fulfillment".
Steve
Sent from XFINITY Connect Application
-----Original Message-----
From: drrbk@xxxxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx, roc-chat@xxxxxxxxxxxxx, aeropac@xxxxxxxxxxxxx
Sent: 2018-03-13 9:21:30 PM
Subject: [tccrockets] Re: LDRS37 Kit Special Available!
Anyone received theirs?
RK
From: James Dougherty
Sent: Wednesday, February 28, 2018 9:11 PM
To: TCC chat ; ROC Chat ; aeropac@xxxxxxxxxxxxx
Subject: [tccrockets] LDRS37 Kit Special Available!
Hi Folks,
LDRS37 Kit special - the Avalanche from Madcow Rocketry!
Only 100 of these kits are available so order now!
https://www.madcowrocketry.com/3-avalanche
Thank you!
-James
Virus-free. www.avast.com
Attachment:
20180409_122613.jpg
Description: JPEG image
