[tcb] Re: Westy Wood Panels - Free
- From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 18 Feb 2014 06:07:23 -0800 (PST)
Sammie, I used 1/8 to replace cargo Dior wood. It is too thick. It stick out
above the molded area. Thought I was told it was suppose to be thinner wood.
------------------------------
On Mon, Feb 17, 2014 10:06 PM CST sammie smith wrote:
>Shirley: I have done several of them from 5X5 sheets of birch veneer that the
>cabinet builders use and I sure thought it was 1/8th. Still have some scraps
>laying around as well as the panels on the bus. Next time I get a chance I
>will measure their thickness. Most good lumberyards/building supply places
>carry the birch in 5X5 sheets. Unfortunately that does not work for the side
>panel on the driver's side since it is longer than 5'. You can splice it
>under the area of the table and it is not too noticeable; or you can use a 4X8
>sheet and then the grain runs the wrong way.
>
>
>________________________________
> From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
>To: tcb@xxxxxxxxxxxxx
>Sent: Monday, February 17, 2014 9:14 PM
>Subject: [tcb] Re: Westy Wood Panels - Free
>
>
>
>the panels on the cargo doors gor 65 westy . Tried 1/8 but too thick. Believe
>from home depot, birch panels but 1/8 not 1/16. Looking for shop/store that
>has 1/16?
>Local?
>
>------------------------------
>On Mon, Feb 17, 2014 9:03 PM CST shirley hall wrote:
>
>>
>>
>>I thought panels were 1/ 16? Tried 1/8 and didn't quite fit right metal
>>guides for panels??
>>
>>
>>------------------------------
>>On Mon, Feb 17, 2014 10:21 AM CST theresabuckner@xxxxxxx wrote:
>>
>>
>>Ronnie I have paneling that needs to be cut . I have everything but the
>>roof . Not sure it would be worth the mess, to haul to & from NAC ? Is the
>>ceiling not square ? & how many pieces ? I have 1/8 " panels 4x8 Terry R
>>
>>
>>-----Original Message-----
>>From: Ronnie Hughes <fracdogii@xxxxxxxxx>
>>To: Tcb <tcb@xxxxxxxxxxxxx>
>>Sent: Mon, Feb 17, 2014 5:01 am
>>Subject: [tcb] Westy Wood Panels - Free
>>
>>
>>
>>I'm replacing all of the wood panels and floor in the back of my Westy and
>>wondered if anyone wants the old ones for patterns? I can bring them to
>>Galveston or Nac next month otherwise I'm throwing them away.
>>
>>
>>3 are okay, 3 are poor, floor is poor, but all are good enough to use as
>>patterns. Ceiling too.
>>
>>
>>Ronnie
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
Other related posts:
