[tcb] Re: Westy Wood Panels - Free
- From: Eric Durmon <wacotxman1@xxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Tue, 18 Feb 2014 03:54:55 -0600
Ronnie email sent please call me (254) 717-8433 Eric i have a 71 im restoring i
need templetes for thank u
Sent from my iPhone
On Feb 17, 2014, at 11:26 PM, Duncan <whocanduncan1@xxxxxxxxx> wrote:
> Technically, I believe it is 3/32". Just shy of 1/8".
>
>
> Duncan
>
>
> -------- Original message --------
> From: sammie smith
> Date:02/17/2014 10:06 PM (GMT-06:00)
> To: tcb@xxxxxxxxxxxxx
> Subject: [tcb] Re: Westy Wood Panels - Free
>
> Shirley: I have done several of them from 5X5 sheets of birch veneer that the
> cabinet builders use and I sure thought it was 1/8th. Still have some scraps
> laying around as well as the panels on the bus. Next time I get a chance I
> will measure their thickness. Most good lumberyards/building supply places
> carry the birch in 5X5 sheets. Unfortunately that does not work for the side
> panel on the driver's side since it is longer than 5'. You can splice it
> under the area of the table and it is not too noticeable; or you can use a
> 4X8 sheet and then the grain runs the wrong way.
> From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
> To: tcb@xxxxxxxxxxxxx
> Sent: Monday, February 17, 2014 9:14 PM
> Subject: [tcb] Re: Westy Wood Panels - Free
>
>
> the panels on the cargo doors gor 65 westy . Tried 1/8 but too thick. Believe
> from home depot, birch panels but 1/8 not 1/16. Looking for shop/store that
> has 1/16?
> Local?
>
> ------------------------------
> On Mon, Feb 17, 2014 9:03 PM CST shirley hall wrote:
>
> >
> >
> >I thought panels were 1/ 16? Tried 1/8 and didn't quite fit right metal
> >guides for panels??
> >
> >
> >------------------------------
> >On Mon, Feb 17, 2014 10:21 AM CST theresabuckner@xxxxxxx wrote:
> >
> >>
> >>Ronnie I have paneling that needs to be cut . I have everything but the
> >>roof . Not sure it would be worth the mess, to haul to & from NAC ? Is the
> >>ceiling not square ? & how many pieces ? I have 1/8 " panels 4x8 Terry R
> >>
> >>
> >>-----Original Message-----
> >>From: Ronnie Hughes <fracdogii@xxxxxxxxx>
> >>To: Tcb <tcb@xxxxxxxxxxxxx>
> >>Sent: Mon, Feb 17, 2014 5:01 am
> >>Subject: [tcb] Westy Wood Panels - Free
> >>
> >>
> >>
> >>I'm replacing all of the wood panels and floor in the back of my Westy and
> >>wondered if anyone wants the old ones for patterns? I can bring them to
> >>Galveston or Nac next month otherwise I'm throwing them away.
> >>
> >>
> >>3 are okay, 3 are poor, floor is poor, but all are good enough to use as
> >>patterns. Ceiling too.
> >>
> >>
> >>Ronnie
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>
>
>
Other related posts:
