[tcb] Re: Westy Wood Panels - Free
- From: theresabuckner@xxxxxxx
- To: tcb@xxxxxxxxxxxxx
- Date: Thu, 20 Feb 2014 00:02:24 -0500 (EST)
Ronnie what ever came about on the 67 wood patterns ? I am sure they would
help . I am to the point of needing interior . If available I would like to use
it . Terry
-----Original Message-----
From: Ronnie <fracdogii@xxxxxxxxx>
To: tcb <tcb@xxxxxxxxxxxxx>
Sent: Tue, Feb 18, 2014 11:25 am
Subject: [tcb] Re: Westy Wood Panels - Free
Sorry Eric I should have said this is for a '67 Westy.
Sent from my iPhone
On Feb 18, 2014, at 3:54 AM, Eric Durmon <wacotxman1@xxxxxxx> wrote:
Ronnie email sent please call me (254) 717-8433 Eric i have a 71 im restoring i
need templetes for thank u
Sent from my iPhone
On Feb 17, 2014, at 11:26 PM, Duncan <whocanduncan1@xxxxxxxxx> wrote:
Technically, I believe it is 3/32". Just shy of 1/8".
Duncan
-------- Original message --------
From: sammie smith
Date:02/17/2014 10:06 PM (GMT-06:00)
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Westy Wood Panels - Free
Shirley: I have done several of them from 5X5 sheets of birch veneer that the
cabinet builders use and I sure thought it was 1/8th. Still have some scraps
laying around as well as the panels on the bus. Next time I get a chance I
will measure their thickness. Most good lumberyards/building supply places
carry the birch in 5X5 sheets. Unfortunately that does not work for the side
panel on the driver's side since it is longer than 5'. You can splice it under
the area of the table and it is not too noticeable; or you can use a 4X8 sheet
and then the grain runs the wrong way.
From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Monday, February 17, 2014 9:14 PM
Subject: [tcb] Re: Westy Wood Panels - Free
the panels on the cargo doors gor 65 westy . Tried 1/8 but too thick. Believe
from home depot, birch panels but 1/8 not 1/16. Looking for shop/store that
has 1/16?
Local?
------------------------------
On Mon, Feb 17, 2014 9:03 PM CST shirley hall wrote:
>
>
>I thought panels were 1/ 16? Tried 1/8 and didn't quite fit right metal guides
>for panels??
>
>
>------------------------------
>On Mon, Feb 17, 2014 10:21 AM CST theresabuckner@xxxxxxx wrote:
>
>>
>>Ronnie I have paneling that needs to be cut . I have everything but the
>>roof . Not sure it would be worth the mess, to haul to & from NAC ? Is the
>>ceiling not square ? & how many pieces ? I have 1/8 " panels 4x8 Terry R
>>
>>
>>-----Original Message-----
>>From: Ronnie Hughes <fracdogii@xxxxxxxxx>
>>To: Tcb <tcb@xxxxxxxxxxxxx>
>>Sent: Mon, Feb 17, 2014 5:01 am
>>Subject: [tcb] Westy Wood Panels - Free
>>
>>
>>
>>I'm replacing all of the wood panels and floor in the back of my Westy and
>>wondered if anyone wants the old ones for patterns? I can bring them to
>>Galveston or Nac next month otherwise I'm throwing them away.
>>
>>
>>3 are okay, 3 are poor, floor is poor, but all are good enough to use as
>>patterns. Ceiling too.
>>
>>
>>Ronnie
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Other related posts:
