[tcb] Re: Westy Wood Panels - Free
- From: Ronnie Hughes <fracdogii@xxxxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Thu, 20 Feb 2014 03:49:35 -0800 (PST)
I have the long side, the back hatch and the side doors I reinstalled the
other originals and didn't copy them. I can bring them to any of the upcoming
shows if you want them.
On Wednesday, February 19, 2014 11:02 PM, "theresabuckner@xxxxxxx"
<theresabuckner@xxxxxxx> wrote:
Ronnie what ever came about on the 67 wood patterns ? I am sure they would
help . I am to the point of needing interior . If available I would like to use
it . Terry
-----Original Message-----
From: Ronnie <fracdogii@xxxxxxxxx>
To: tcb <tcb@xxxxxxxxxxxxx>
Sent: Tue, Feb 18, 2014 11:25 am
Subject: [tcb] Re: Westy Wood Panels - Free
Sorry Eric I should have said this is for a '67 Westy.
Sent from my iPhone
On Feb 18, 2014, at 3:54 AM, Eric Durmon <wacotxman1@xxxxxxx> wrote:
Ronnie email sent please call me (254) 717-8433 Eric i have a 71 im restoring i
need templetes for thank u
>
>Sent from my iPhone
>
>On Feb 17, 2014, at 11:26 PM, Duncan <whocanduncan1@xxxxxxxxx> wrote:
>
>
>Technically, I believe it is 3/32". Just shy of 1/8".
>>
>>
>>
>>
>>Duncan
>>
>>-------- Original message --------
>>From: sammie smith
>>Date:02/17/2014 10:06 PM (GMT-06:00)
>>To: tcb@xxxxxxxxxxxxx
>>Subject: [tcb] Re: Westy Wood Panels - Free
>>
>>
>>
>>Shirley: I have done several of them from 5X5 sheets of birch veneer that the
>>cabinet builders use and I sure thought it was 1/8th. Still have some scraps
>>laying around as well as the panels on the bus. Next time I get a chance I
>>will measure their thickness. Most good lumberyards/building supply places
>>carry the birch in 5X5 sheets. Unfortunately that does not work for the side
>>panel on the driver's side since it is longer than 5'. You can splice it
>>under the area of the table and it is not too noticeable; or you can use a
>>4X8 sheet and then the grain runs the wrong way.
>>
>>
>>________________________________
>> From: shirley hall <vwbuslady@xxxxxxxxxxxxx>
>>To: tcb@xxxxxxxxxxxxx
>>Sent: Monday, February 17, 2014 9:14 PM
>>Subject: [tcb] Re: Westy Wood Panels - Free
>>
>>
>>
>>the panels on the cargo doors gor 65 westy . Tried 1/8 but too thick. Believe
>>from home depot, birch panels but 1/8 not 1/16. Looking for shop/store that
>>has 1/16?
>>Local?
>>
>>------------------------------
>>On Mon, Feb 17, 2014 9:03 PM CST shirley hall
wrote:
>>
>>>
>>>
>>>I thought panels were 1/ 16? Tried 1/8 and didn't quite fit right metal
>>>guides for panels??
>>>
>>>
>>>------------------------------
>>>On Mon, Feb 17, 2014 10:21 AM CST theresabuckner@xxxxxxx wrote:
>>>
>>>>
>>>>Ronnie I have paneling that needs to be cut . I have everything but the
>>>>roof . Not sure it would be worth the mess, to haul to & from NAC ? Is the
>>>>ceiling not square ? & how many pieces ? I have 1/8 " panels 4x8 Terry R
>>>>
>>>>
>>>>-----Original Message-----
>>>>From: Ronnie Hughes <fracdogii@xxxxxxxxx>
>>>>To: Tcb <tcb@xxxxxxxxxxxxx>
>>>>Sent: Mon, Feb 17, 2014 5:01 am
>>>>Subject: [tcb] Westy Wood Panels - Free
>>>>
>>>>
>>>>
>>>>I'm replacing all of the wood panels and floor in the back of my Westy and
>>>>wondered if anyone wants the old ones for patterns? I can bring them to
>>>>Galveston or Nac next month otherwise I'm throwing them away.
>>>>
>>>>
>>>>3 are okay, 3 are poor, floor is poor, but all are good enough to use as
>>>>patterns. Ceiling too.
>>>>
>>>>
>>>>Ronnie
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>>
>>
Other related posts:
