John, I guess I am not sure what you are wanting? I run my mikes, turntable, tape deck, mini disc, and another computer's audio thru a mixer and then to the input jack on my main system where I do all the recording. Studio Recorder handles that just fine. Are you sure you are setting the record input in the computer's soundcard mixer with line-in as the item that is checked to receive input for recording? As I am sure you probably know you can get to that control either from the entertainment / volume settings in accessories or from the control panel under sounds and audio. Just remember that you have to set 1 input as your recording input. Just checking line-in under playback doesn't mean that what you are hearing is what is going to get recorded. David Tanner Rehabilitation Program Specialist 3 Assistive Technology Specialist - Blind Assistive Technology Department MN State Services f/t Blind Office- 651-642-0795 Cell- 651-270-2233 >>> JStiers@xxxxxxxxxxx 02/01 6:19 AM >>> Rob When I mentioned the use of mixers, sorry, but I was refering to external mixers. I work for a radio reading service, and was thinking along the lines of broadcast equipment and the like. I found that if I plug my external mixer in to the mic input, I had to adjust all my pots down to compensate for the mic input. If SR had a line input it woodn't be necessarry to do that. John ----- Original Message ----- From: "ROB MEREDITH" <rmeredith@xxxxxxx> To: <studiorecorder@xxxxxxxxxxxxx> Sent: Tuesday, January 31, 2006 5:28 AM Subject: [studiorecorder] Re: New Beta Available > John: > > While this isn't a bad idea, most professional sound cards don't offer > a mixer that software like Studio Recorder can access. So, this feature > would have limited usefulness > > Rob Meredith. > >>>> JStiers@xxxxxxxxxxx 01/28/06 08:47PM >>> > Rob > I think it would be a good idea to add a line-in choice to the menus of > > Studio Recorder. > I say this because a lot ov people are using mixers going in to the > line-in > accessory on their soundcard. > Thank you > John Stiers > ther > ----- Original Message ----- > From: "ROB MEREDITH" <rmeredith@xxxxxxx> > To: <studiorecorder@xxxxxxxxxxxxx> > Sent: Friday, January 27, 2006 12:26 PM > Subject: [studiorecorder] New Beta Available > > >> There is a new beta version of Studio Recorder available. Thanks to >> Sarah and others, it has some timely changes and aditions which > should >> make life while using it a lot better. Never again will you have to > deal >> with selection points getting flipped! >> >> Rob Meredith >> >> >> > > > > >
BEGIN:VCARD VERSION:2.1 X-GWTYPE:USER FN:Tanner, David TEL;WORK:651-642-0795 ORG:;SSB TEL;PREF;FAX:651-649-5927 EMAIL;WORK;PREF;NGW:DTANNER@xxxxxxxxxxxxxxxxxxxxxxx N:Tanner;David TITLE:Rehab Tech Spec END:VCARD