[SI-LIST] Signal crossing Split plane
- From: sunil bharadwaz <sunil_bharadwaz@xxxxxxxxx>
- To: SI LIST <si-list@xxxxxxxxxxxxx>
- Date: Sun, 18 Nov 2007 01:25:30 -0800 (PST)
Hi ,
I have few signals (@ 80 Mhz & 20 Mhz) crossing the split Power
plane in the adjacent layer.
The 20 Mhz signal is diffrerential signal.The 80 Mhz is a single
ended signal.
I want to analyse the affect on Signal Integrity of these two
signals due to split plane.
I believe one need to define his stack up (Including the
split) & then extract the layout to simulate.
I'am not too sure if the prevalent SI tools have an option
of creating split planes .
Pls suggest me a right tool to carry out this.Also , i'am
looking for a free tool to start with (even if the accuracy
is slightly limited).
Thanks in Advance!!
Regards
Sunil.Bh
---------------------------------
Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
