Re: "From my experience, there is no ideal scope software for jitter speration yet (for both Agilent & Tektronix)" I have to recommend that you try LeCroy scopes (now Teledyne LeCroy). I don't know if our implementation will qualify as "ideal", but I'm pretty sure you will be pleasantly surprised. If you do try it, then at least the next time you say "there is no ideal scope software for jitter separation" you will be able to mention all three companies with ... hmm, what was you criterion for mentioning only Agilent and Tektronix? -- Joe S. From: <kesir@xxxxxxxx> To: "ah.vinod" <ah.vinod@xxxxxxxxx>, "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>, Date: 02/01/2013 02:18 AM Subject: [SI-LIST] Re: Random Jitter Value varies with Data pattern Sent by: si-list-bounce@xxxxxxxxxxxxx Hi Vinod, From my experience, there is no ideal scope software for jitter speration yet (for both Agilent & Tektronix). Somehow, Agilent software seems a little bit better. At the same time, Dual dirac method is more accurate while estimating gaussian distribution Rj, but the Dj measured by dual dirac method is usually not the real Dj. So I would suggest you to use dual dirac to estimate Rj while using other method or mannual measuring the distribution to estimated Dj. For arbitrary waveform, I would suggest your captured waveform to be smaller than the arbitrary waveform and make sure the capuring is inside one waveform. Otherwise, your measurement may not be accurate. Best regards JKE ----- Original Message ----- From: vinod ah <ah.vinod@xxxxxxxxx> To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx> Subject: [SI-LIST] Re: Random Jitter Value varies with Data pattern Date: 2013-02-01 14:16------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu