[rollei_list] Re: cleaning old Rolleinars and filters
- From: Don Williams <dwilli10@xxxxxxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Sun, 22 Jan 2006 09:34:21 -0800
At 10:59 AM 1/20/2006 -0800, Dick Burk wrote:
Dry Isopropyl alcohol is also effective for some types of oil
films and is safe. Isopropyl rubbing alcohol has too much water in
it. The residual water may creep into the mounting. 99% Isopropyl
is available at many drugstores, its not expensive.
Interesting you should mention "rubbing alcohol". For years I had
been buying those special eyeglass cleaning pads.
One day I just dabbed a bit of soft paper towel with the stuff, wet
my eyeglasses thoroughly (wiping a bit) and then dried them with the
other end of the paper towel. Best cleaning job ever, and the paper
towel can be used several times, using different corners.
I haven't tried that with my car windshield but I would bet it works
fine there, but there may be some wax there so it would take a bit more work.
Haven't tried that with photo lenses, and don't plan to.
I usually buy two bottles of the stuff when it's on sale at 2 for 99 cents.
DAW
Other related posts: