[pure-silver] Re: improvised dry mountpress. was: Under exposed frame
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Sat, 8 Jan 2005 18:23:17 -0800
----- Original Message -----
From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Saturday, January 08, 2005 6:05 PM
Subject: [pure-silver] Re: improvised dry mountpress. was:
Under exposed frame
>
> ----- Original Message -----
> From: "Gene Johnson" <genej2@xxxxxxx>
> To: <pure-silver@xxxxxxxxxxxxx>
> Sent: Saturday, January 08, 2005 5:16 PM
> Subject: [pure-silver] improvised dry mountpress. was:
> Under
> exposed frame
>
>
>> hey Richard. I have a 16x20 piece of 1/2" aluminum plate
>> in the garage. I
>> was thinking of heating it up in the oven and just
>> setting
>> it on top like a
>> weight :)
>
> Along with an old oven gas jet to keep it hot no doubt
> :-)
> Actually this should make a perfect cooling weight
> although probably too heavy to handle conveniently. I will
> have to calculate what this weighs. A cabinet handle
> screwed
> to one end will help.
>
> ---
> Richard Knoppow
> Los Angeles, CA, USA
> dickburk@xxxxxxxxxxxxx
>
For reasonably pure Al about 15 lbs.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
