[pure-silver] Re: Replacement bellows for full plate camera
- From: Bogdan Karasek <bkarasek@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Tue, 03 Feb 2009 11:08:26 -0500
Thanks Howard and Richard,
That's one bellows making company that I will cross off my list. After
stupidity, there's nothing worse than poor execution.
Cheers,
Bogdan
Howard Efner wrote:
On Feb 2, 2009, at 11:19 PM, Richard Knoppow wrote:
I had a bellows for an 8x10 Agfa/Ansco camera made by Flexible
Products some years ago. Service was very good but the workmanship
left something to be desired. However, the bellows worked and are
still on the camera.
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
======================================================================
=======================================
To unsubscribe from this list, go to www.freelists.org and logon to
your account (the same e-mail address and password you set-up when
you subscribed,) and unsubscribe from there.
I will have to echo Richard's comment about Flexible Products. They
did a bellows for a 5x7 camera - still working and light tight but
the workmanship left something to be desired. Rounded and not sharp
pleats. Looked more like a bellows for a machine tool rather than a
camera.
Howard
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to
your account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
--
________________________________________________________________
Bogdan Karasek
Montréal, Québec bogdan(at)bogdanphoto.com
Canada www.bogdanphoto.com
"I bear witness"
________________________________________________________________
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
