[pure-silver] Re: RC to FB
- From: "Koch, Gerald" <gkoch02@xxxxxxxxxx>
- To: "'pure-silver@xxxxxxxxxxxxx'" <pure-silver@xxxxxxxxxxxxx>
- Date: Tue, 4 Jan 2005 09:31:32 -0500
I have a drug-store print which I blue toned in either Kodak T-11 or T-12 over
50 years ago. It is still in perfect shape even though it hasn't been given any
special care being stored in a non-archival box in a drawer.
I didn't particularly like the effect of the blue color and never toned another
print so I can't say whether it's longevity is a fluke or not.
Jerry
-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver-bounce@xxxxxxxxxxxxx]
On Behalf Of Richard Knoppow
Sent: Monday, January 03, 2005 6:15 PM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: RC to FB
----- Original Message -----
From: "Breukel, C. (HKG)" <C.Breukel@xxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Monday, January 03, 2005 2:45 AM
Subject: [pure-silver] Re: RC to FB
>
>
>> -----Original Message-----
>> From: Peter De Smidt [mailto:pdesmidt@xxxxxxx]
>> Sent: Friday, December 31, 2004 10:44 PM
>> To: pure-silver@xxxxxxxxxxxxx
>> Subject: [pure-silver] Re: RC to FB
>>
>>
>>
>> I once read that if you want to put
>> a print in a
>> bathroom or kitchen, that you should frame the
>> dry-mounted
>> print with glass
>> as the backing board, instead of using archival
>> corrugated
>> board. You then
>> band the edge of the glass, mat board, print, mat board,
>> glass sandwich with
>> aluminum foil, which is then taped (with Mylar tape) to
>> form a vapor
>> barrier.The extra glass would add weight and cost, and
>> one
>> would have to be
>> careful that the tape doesn't peek out from under the
>> frame.
>> Does this
>> soundlike a viable way to minimize print deterioration
>> due to
>> environmental
>> factors?
>>
>
>
> FWIW:
>
> I have a blue toned FB print (blue toning is one of the
> shurest ways to
> DEcrease the permanance of your prints....;-)..)
> sandwiched between two
> glass plates and 2 sheets of archival matt board, no
> protection on the
> edges, hanging in my bathroom for 3 years: it's
> brozing/silvering at the
> edges a oit, which is actually kinda attractive, but it's
> keeping
> surprisingly well considering the conditions (before the
> bathroom it had
> been hanging in a bedroom for 2 years, and the bronzing
> already started
> then)
>
> Best,
>
> Cor
You should specify that this applies to Iron-blue toning,
not to Gold toning. Gold does not produce the brilliant blue
of Iron but is very permanent. Iron toning converts the
silver to a form similar to cyanotype. It is affected by
alkaline solutions and too much light but will often
regenerate in the dark. In general, ferricyanide-metal
toners, like Iron and Copper toners, are less permanent than
the raw Silver image.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
================================================================================
=============================
To unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
