[pure-silver] Re: Basic Chemistry
- From: "Ken Hart1" <kwhart1@xxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Sat, 14 Jun 2008 15:42:45 -0400
----- Original Message -----
From: "Howard Efner" <hfefner@xxxxxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Saturday, June 14, 2008 3:35 PM
Subject: [pure-silver] Re: Basic Chemistry
The only solution where temperature is critical is the developer.
Stop and fix are not so fussy, so they just need to be in the
ballpark. This is for B&W processing, color is a different ball of wax.
Howard Efner
Temp for C41 using Kodak's 'sink-line' chemistry is 100F+/- 0.25 for
developer, 70 to 105F for bleach. fixer, and stabilizer. For consistency, I
run everything at 100F, using a temperature bath built from parts of a
"decommissioned" (junked) minilab.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
