"Peter Badcock" <peter.badcock@xxxxxxxxx>
Should T not be expressed in degrees Kelvin rather than degF ?
It does seem so when you look at it as: Aq + Br + Cs = T * (A + B + C) A, B, C ... are the volumes q, r, s ... are their initial temperatures T is the final temperature If you use absolute temperature and express the temps as q + K, r = K ... where K is 273, and simplify the result you will find the K's drop out. It's easy to see why when the equation is re-arraigned as r = [(A / B) * (T - q)] + T The formula looks at the ratio of the volumes and uses that to scale the temperature difference T - q the solution needsto be brought to. This temperature difference is then added to the base temperature. Since it works with differences the absolute values do not matter.
If you need to raise 1 litre 10 degrees using 5 liters of water bath then the water bath should be 1/5 warmer - the temperature difference * the volumes is the same on the waterbath and the developer side. == Nicholas O. Lindan Cleveland Engineering Design, LLC Cleveland, Ohio 44121 ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.