Hello Jean-Claude, I haven't used the PC version for a while since I have been busy with the Android development, so I can't comment strait away on this. The comments above were related to the Android version by the way. But I will have a look and see if I can explain and/or fix this on the PC version. All the best and I hope to contact you on the Bauhinia. 73, John On Thu, Dec 22, 2011 at 6:42 PM, jcjglt@xxxxxxxxx <jcjglt@xxxxxxxxx> wrote: > On 22/12/2011 12:14, John Douyere wrote : > >> Hi Greg, >> Appreciate the feedback. >> 1. You are correct, the mode change is an automatic feature, driven by >> the server, and the downgrade or upgrade of modes is linked to two things: >> ..............................**............... >> >> 2. The disconnect issue, first thing to check: does the modem screen show >> that the ~QUIT command has been sent (the next *TX* line after pressing the >> disconnect button)? If not I suspect it is related to the client not >> hearing the server properly, in which case an abort is ok (although not the >> easiest option). >> ..............................**.............. >> >> Thanks and 73, John (VK2ETA) >> > > Hi John, >> > Here also I've never been able to disconnect from the left button of the > terminal screen labelled "connect". After connection is achieved it has > always remained labelled "connect", I could never read "quit", therefore > I've allways used the "abort" button to disconnect even if this is not > considered as courteous but I've no choice. > After having upgrading regularly I'm now running fldigi-3.21.33 and > jPSKMail-1.4b.8 both under Ubuntu 10.04 Lucid and Windows XP. > 73, Jean-Claude - FK8IH > > >