[program-l] Re: HTML: Printing
- From: "Mark Long" <marklon@xxxxxxxxxxxxx>
- To: <program-l@xxxxxxxxxxxxx>
- Date: Fri, 2 Sep 2005 13:01:38 +0100
IE just renders the HMTL but you can put whatever you like in there so
feel free to add formatting.
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx
[mailto:program-l-bounce@xxxxxxxxxxxxx] On Behalf Of Ian Sharpe
Sent: 02 September 2005 12:33
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] HTML: Printing
Hi All,
I want to present a number of identical reports as a continual HTML page
to
make it easy to print them all off in one go. Each report will have a
basic
header + body and I intend to use an IE tag to force a page break at the
end
of each report. Reports will typically be less than a page but could run
to
many pages in some cases. This is almost good enough and may well
suffice.
However, the client has asked, reasonably enough, whether it is possible
to
put the header information at the top of each page rather than on the
first
page of each report and possibly also include a page number.
I suspect it is possible to tell IE to put page numbers on each page
when
printing a web page but this is no good. It would have to be relative to
the
current report.
Does anyone know of any way that I can put the header at the top of each
page of the report to which it belongs?
Any thoughts gratefuly received as always.
Cheers
Ian
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
