Re: [PCWorks] Basic XP system and accessing the internet
- From: Hugh Vandervoort <hughv2@xxxxxxxxxxx>
- To: pcworks@xxxxxxxxxxxxx
- Date: Sun, 03 Aug 2008 01:36:39 -0400
This doesn't look right.
Check the IP address and Domain name Servers settings they recommend.
I'd start over with the procedure in the manual, and go step by step.
LarryB wrote:
> Here is the ipconfig Hugh.
>
> Microsoft Windows XP [Version 5.1.2600]
> (C) Copyright 1985-2001 Microsoft Corp.
>
> C:\Documents and Settings\Admin>ipconfig/all
>
> Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : ndvr2505
> Primary Dns Suffix . . . . . . . :
> Node Type . . . . . . . . . . . . : Unknown
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network
> Connecti
> on
> Physical Address. . . . . . . . . : 00-13-20-6C-CA-EC
> Dhcp Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 192.168.1.10
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.1.1
> DNS Servers . . . . . . . . . . . : 4.2.2.1
> 4.2.2.2
>
> C:\Documents and Settings\Admin>
>
> Larry Browning
> Have a great day
>
>
> Hugh Vandervoort wrote:
>> Open a command prompt and enter ipconfig /all
>> and paste it into an email.
>>
>>
>> LarryB wrote:
>>
>>> I have a NV3000 4 camera security system installed on a basic XP SP2 system.
>>>
>>> I am trying to access the Internet via the basic system to allow updates
>>> of the system XP not NV. (figure if I can do one I can do the other.)
>>>
>>> I have IE installed and I have the NV application enabled to allow
>>> "remote" viewing and control. I have to use a IP address to access this
>>> function. There is an application that is installed on the remote pc
>>> that connects to the IP address.
>>> If I just open a browser without using the application and put the
>>> address in directly, it will load software to allow viewing. (used to
>>> view from another location.)
>>>
>>> When I open IE on the PC it will not connect to allow browsing.
>>> My question is why? I should be able to connect to the M$ sites to
>>> update the software.
>>>
>>> This is co-located with my shop PC which connects just fine thru the
>>> bellsouth modem and my Linksys router using DSL.
>>> I have a cable from the security PC going direct to the router also and
>>> is a Cat 5 cable.
>>>
>>> I remember having to forward ports in the Linksys router to allow remote
>>> viewing and wonder if it might be as simple as changing some settings to
>>> allow internet access.
>>>
>>> I have put this on the CCTV forum and many have read it but no answers
>>> in several days. So thought I would try here.
>>>
>>> Thanks for your time.
=========================
The list's FAQ's can be seen by sending an email to
PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line.
To unsubscribe, subscribe, set Digest or Vacation to on or off, go to
//www.freelists.org/list/pcworks . You can also send an email to
PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line. Your
member list settings can be found at
//www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks . Once logged in, you have
access to numerous other email options.
The list archives are located at //www.freelists.org/archives/pcworks/ .
All email posted to the list will be placed there in the event anyone needs to
look for previous posts.
-zxdjhu-
Other related posts:
