HB, To clear up any confusion, the address for your router's configuration screen is nothing more than an IP address (there's no need to access a modem like this). As already mentioned, it is usually something similar to 192.168.1.1. Mine uses 192.168.0.1 and assigns IPs to the networked computers in the range of 192.168.0.100-192.168.0.255 (not that I have that many systems in need of addresses, of course). For future reference, you should open up your favorite browser window and type in some of these suggestions until you discover which one opens up the configuration screen. Once it opens, write the successful combo down somewhere safe. Since the tech didn't have a problem accessing the settings, it sounds like your router is still using that model's default username/password combo that ALL crackers already know by heart. Since you're already in there, change it to something only you would know (and remember!). If there's a button called "Save Settings" or something similar, click on it before leaving that page. Your router will take about 15 seconds or so to reset with the new name/pass in place. This action will go a long way towards protecting you from casual crackers trying to take over your network. If this is a wireless router, you should also read up on wireless security standards and turn on the best one that router allows. All it takes is setting the exact same passkey on every system that is allowed access to the network/internet. I use the network's main computer to access the router configuration, set a better name/pass combo and then (if available) let the router generate a random passkey for the strongest encryption possible. If any of this leads you to more questions than answers, I will consider this reply of mine a success. :O) Peace, GMan "The only dumb questions are the ones that are never asked!" ----- Original Message ----- From: <HandsomeBlck@xxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Monday, June 18, 2007 8:08 AM Subject: -=PCTechTalk=- Re: Setting Comcast modem > Don, > Our home network is a PC (mine - desktop and laptop) and MAC (wife's - > desktop and laptop). Yesterday morning, my wife could not access the > Internet > with either computer. No problems at all with my desktop. Later in the > day, she > was able to access the Internet with both computers. Weird. > The Comcast black box is a broadband combination modem/router. Once > the > tech accessed the web site, there was a page/link that said something > about > port forwarding. > With this information, can you determine if he was accessing the modem > or the router? > > Thanks, > > HB -- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To unsubscribe or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/