[pandaro] Re: Clock
- From: "Chris Bell (Lists)" <chris.lists@xxxxxxxxxxxx>
- To: pandaro@xxxxxxxxxxxxx
- Date: Fri, 23 May 2014 12:21:43 +0100
Chris Evans (CJE/4D) <chris@xxxxxxxxxxxxxxx> wrote:
>Chris Bell (Lists) wrote:
> > Chris Evans (CJE/4D) <chris@xxxxxxxxxxxxxxx> wrote:
> > > Chris Bell (Lists) wrote:
> > > > - 'Configure > Time+date > Set from network' doesn't work.
> > > > (Clicking 'Try' counts to 100 and results in 'Busy'.)
> > > Does it have pool.ntp.org as the time server?
> > It's 'uk.pool.ntp.org' but is greyed out and can't be changed.
> It will be greyed out if 'Pick a server' is ticked'
> Not greyed out here if unticked.
> It is stored i: $.!boot,choices.boot.tasks.TimeSetup
The 'Pick a server' tick is greyed-out here, so I can't untick it.
My TimeSetup obey file is as follows. Does it give a clue as to what's
going wrong?
SDFS::Panda.$.!Boot.Choices.Boot.Tasks.TimeSetup
------------------------------------------------
| This file was automatically generated by !TimeSetup
| Format:6
| Locality:UTC+00:00_UK_'GMT'
| ServerSelector:2
Unset NetTime$Server
SetEval NetTime$Loaded 1
RMEnsure NetTime 0.39 X RMLoad System:Modules.Network.NetTime
RMEnsure NetTime 0.39 SetEval NetTime$Loaded 0
If <NetTime$Loaded> Then NetTime_PollInterval 1800
> > > > - FreeTime sets the clock an hour slow (whether DST is set or
> > > > not).
> I was using V1.14 from Joseph Heenan's site which isn't 32 bit Using
> from the ARMClub 32bit V1.14 (Confusing the messages box says 1.13) I
> do get the one hour error. So does a Pi. The problem is therefore
> best raised in the newsgroups or ROOL forum
I'll do that if we can't get NetTime working.
> > PS. Why does each 'pandaro@xxxxxxxxxxxxx' posting arrive here twice?
> You were subscribed as chris@ and chris.lists@ We've set chris.lists
> to be on vacation!
Ah yes, silly me. Thanks for checking that. I've now unsubscribed the
unwanted address.
Chris.
--
Other related posts:
