[modeleng] Re: the wife...
- From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 21 Nov 2007 11:45:01 -0000
Peter,
perhaps you could set your wife up to do training courses for other wives!
Alan
----- Original Message -----
From: <peter.chadwick@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, November 21, 2007 11:40 AM
Subject: [modeleng] Re: the wife...
>>>"/No tool shop shall be allowed, to open its doors, if they don't have
an extensive woman's shoe section on the premises !
This to be made compulsory, and failure to do so, should result in hefty
penalties!"
/This would make all of our lives a lot easier, as we could take our
Managing Directors to places like Axminster and Chronos.
Their bill would inevitable be higher then ours, and who would be
standing their then staring at the ground at the checkout ?
I believe there is genius in this idea.....<<<
My wife wouldn't go with that, on the basis that it spoils a good tool
shop. She normally takes me to ME Exhibitions, and she took me to buy the
lathe. She then took one look at the one I was thinking off, rejected it
as too small, and firmly said that a bigger and more expensive one was
needed. She also insisted on buying the milling machine at the time rather
than later......and she has few pairs of shoes.
----------
Zarlink Semiconductor Limited is a Company registered in England and Wales
under number 00705031 with its registered office at Cheney Manor, Swindon,
Wilts SN2 2QW, England.
This email is confidential and may contain information that is privileged
and
exempt from disclosure by law. If you have received it in error, please
contact
the sender immediately by return email and then delete it from your system;
you
should not copy it or disclose its contents to anyone. Emails are not
secure
and cannot be guaranteed to be error free as they can be intercepted,
amended,
lost or destroyed, or contain viruses. Anyone who communicates with us by
email
is taken to accept these risks.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.2/1142 - Release Date: 20/11/2007
17:44
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
