Wilfrried, Do you chamfer the ends of the blade before silver soldering ? I've tried a few times when short of a blade but without much success. E.W. ----- Original Message ----- From: "Wilfried Vermeiren" <vermeiren.wilfried@xxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Sunday, January 08, 2006 7:13 PM Subject: [modeleng] bandsaws > > Hi, > When someone is asking " I have a lathe what should I buy next ? " the > best > answer I my opinion is a band saw. Once you have one you can't without and > if you don't have one you surely miss something. > As with all machine tools the tool is one thing but then comes the tooling > !! Band saws can be bought some good some bad and some *** well in all > cases > expensive and the more you spoil or break the more . > I stopped buying ready made ones years ago and buy instead a case which > contains around 30m of the stuff. The means of joining them is easy flo > silver solder. Al that is needed is a simple jig to hold the blade whilst > brazing. > If you prepare a couple at a time you will always have a spare at hand and > a > broken one can be repaired the same way. > I started of with a case with 24 teeth but collected a range during the > years. > As for where to buy, have a word with the people who sharpen tools or > machine tooling suppliers. > Regards > Wilfried Vermeiren > http://users.skynet.be/modelbouw.wilfried > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.