Are you kidding? Have any of us had any luck with spraying paint on tissue? Well, I can't speak for anybody but it makes me chuckle because we are mostly foam junkies, with exception of the guys like John Cooper who cut their teeth building balsa kits and MAY have some tissue experiences. ;-) Then there are the glow guys amongst us who probably have put together some balsa stuff too, but what you describe sounds so fragile I shudder to think what would happen to it in my hands! ;-) It would probably look like a bad wet parade float when I got finshed with it! :D I DO LOOK FORWARD to seeing it though when you get finished with it. I can gather from the few times we have talked that you are kind of meticulous about these kinds of things so I'll bet it turns out GREAT. Can't wait to see it. And in all seriousness, what you describe sounds very doable with painting it after it is done, but I don't think it will be any heavier painting it this way than with an other coating you put on to try and strengthen/stiffen the wing and fuse areas. So I think it will be fine. The spray paint might actually be best because a lighter/thinner coat than some other method will probably prove to be the ticket. Good luck with it. Bill Beavers Lektrik_Flyer http://users.tcworks.net/~bbeavers/ Have others friends join lektrik_flyers listserv by looking it up at //freelists.org or email me their email address and I'll add it for them. ----- Original Message ---- From: "Lamb, Joe" <joe.lamb@xxxxxxxxxxxx> To: lektrik_flyers@xxxxxxxxxxxxx Sent: Wednesday, October 11, 2006 11:35:51 AM Subject: [lektrik_flyers] Re: NOTAM Well, that SE-5 that I've been threatening to build finally arrived on my doorstep - where it sat from before noon until I got home from the office at around midnight. I'm really impressed with the quality of the wood in the kit. Some of the Guillow's kits I've bought from Hobby Lobby have probably been sitting on the shelf since Jimmy Carter was a farmer and might as well have been pine. This one is really nice. I was struck again by how ugly the SE-5 is. Hopefully it'll turn out ok 'in the flesh' but the 3-views aren't doing the design any favors. Maybe I should have chosen an Albatross... Anyway, I'm going to get started after a few more nights of = visualization and meditation on where everything should go and how to build a wing strong enough to take the punishment I'm undoubtedly going to dish out on it while still being super-light. I'm thinking basswood for leading edge material and some sort of lite-ply diherial brace, but I don't know for sure.20 I've been reading up online about other similar projects, and a lot of people cover with tissue, then just spray on a coat of Krylon enamel straight out of the can. Has anybody had any luck with this? Wouldn't it be really heavy? > ---------- > From: lektrik_flyers-bounce@xxxxxxxxxxxxx on behalf of John Gray > Reply To: lektrik_flyers@xxxxxxxxxxxxx > Sent: Wednesday, October 11, 2006 9:41 AM > To: lektrik_flyers@xxxxxxxxxxxxx > Subject: [lektrik_flyers] Re: NOTAM > > Hi Guys, > > Who is interested in Wooster this Sunday pm around 2:00 or 3:00? If there is > enough interest Ross and I would like to come down. > It sure was fun last weekend. Just like old times, except I would like to > get in the covered area for our equuipment. > > Thanks, > > John G > > ___________________________________________________________________________ > You are a member of the lektrik_flyers listserv. You became a member of this > listserv by either directly subscribing or being recommended for subscription > by a fellow member. If you no longer wish to be a member of this listserv, > please follow the link (//www.freelists.org/list/lektrik_flyers) and > follow the onscreen prompts to be removed from this list. Should this not > work for you send an email to bbeavers57@xxxxxxxxx and supply the email > address you wish to have removed from the listserv, and this will be done at > the earliest available opportunity. Visit our website at > http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to > enjoy being a member of the lektrik flyers. > ___________________________________________________________________________ You are a member of the lektrik_flyers listserv. You became a member of this listserv by either directly subscribing or being recommended for subscription by a fellow member. If you no longer wish to be a member of this listserv, please follow the link (//www.freelists.org/list/lektrik_flyers) and follow the onscreen prompts to be removed from this list. Should this not work for you send an email to bbeavers57@xxxxxxxxx and supply the email address you wish to have removed from the listserv, and this will be done at the earliest available opportunity. Visit our website at http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to enjoy being a member of the lektrik flyers. ___________________________________________________________________________ You are a member of the lektrik_flyers listserv. You became a member of this listserv by either directly subscribing or being recommended for subscription by a fellow member. If you no longer wish to be a member of this listserv, please follow the link (//www.freelists.org/list/lektrik_flyers) and follow the onscreen prompts to be removed from this list. Should this not work for you send an email to bbeavers57@xxxxxxxxx and supply the email address you wish to have removed from the listserv, and this will be done at the earliest available opportunity. Visit our website at http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to enjoy being a member of the lektrik flyers.