Yes, where it says, endIF, find the E in endif and hit enter. This will move it done one line. Go to that blank line and paste everything just as you see it in the E-mail. There should be four lines that need to be pasted in. Just be sure to take out the word, name, and type in your own. Then when you get it copied and pasted in. You can arrow up and down to make sure that there are no blank lines above, or below what you pasted in. If there are not, then hit alt F4. When it asks if you want to save the chages, tell it yes. You will hear the difference the next time you start Jaws. I hope that I explained this well. Jack ----- Original Message ----- From: "chevelle" <chevelle33@xxxxxxxxxxx> To: <jfw@xxxxxxxxxxxxx> Sent: Thursday, January 06, 2005 1:19 PM Subject: Re: Script to change start up message of jaws > Hi Jack, I'm a little bit confused on the copying part. I assume I would > select all the scripts, and copy them to the clipboard right? then follow > your instructions to find those two lines. Then above the first line would > I > just press control v to paste everything? Not sure if this is right. Don't > want to mess anything up. Thanks for the help. > ----- Original Message ----- > From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx> > To: <jfw@xxxxxxxxxxxxx> > Sent: Thursday, January 06, 2005 1:06 PM > Subject: Re: Script to change start up message of jaws > > >> Here are the scripts given to me. >> >> >> >> If you would like for Jaws to give you the time and date at startup, do >> the >> >> following. >> >> 1 press insert+0. >> >> 2 press ctrl+L. >> >> 3 press the letter B, as in boy. >> >> 4 up arrow untill you hear autostart. >> >> 5 press enter. >> >> 6 down arrow untill you find the following 2 lines. >> >> endIf >> >> endIf ; DefaultFirstTime == 0 >> >> 7 just above the line, EndIf, paste in the following. Replace Name with >> your >> own. >> >> >> >> 8. Alt F4 out of there and tell it yes, to save the changes. Now, here's >> what you copy, just as it's written here. Don't forget to put your own >> name >> in place of the worde Name. >> >> >> >> SayString("Hello Name, Today is") >> >> Say ( SysGetDate(), ot_string) >> >> Say (SysGetTime(), ot_string) >> >> SayString("Have a great day!") >> >> >> >> -- >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx >> To unsubscribe from this mailing list, send a message to >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. >> Archives located at: //www.freelists.org/archives/jfw >> >> If you have any concerns about the list, post received from the list, or >> the way the list is being run, do not post them to the list. Rather >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx > > -- > To post a message to the list, send it to jfw@xxxxxxxxxxxxx > To unsubscribe from this mailing list, send a message to > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. > Archives located at: //www.freelists.org/archives/jfw > > If you have any concerns about the list, post received from the list, or > the way the list is being run, do not post them to the list. Rather > contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx