Re: Script to change start up message of jaws
- From: "Ricque" <ricque@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Fri, 7 Jan 2005 01:41:36 -0500
Hi Chris,
I don't know what version of Jaws you are using,
but try this.
Try changing the verbosity level to the highest, and see if that changes it.
If it does, then you can look in those settings, and see what is unchecked,
and apply that to the verbosity level you generally use.
It might be, Jaws message, or screen message.
I got Jaws to stop saying that at one time, but it's been too long ago to
remember.
HTH,
Ricque
----- Original Message -----
From: "Chris & Mary" <cmchaffin@xxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, January 07, 2005 12:19 AM
Subject: Re: Script to change start up message of jaws
> Hi all,
> Thank you for the scripts, they work great!
> But Jaws still says Jaws for Windows before it says the stuff I addded
with
> the new scripts.
> Is there any way to stop Jaws from saying the Jaws for Windows statement
at
> the beginning?
> Thanks for the help,
> Chris Chaffin
>
> ----- Original Message -----
> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Thursday, January 06, 2005 4:28 PM
> Subject: Re: Script to change start up message of jaws
>
>
> > What I do not understand is this. Why do some E-mails come through as
> > double spaced lines and some don't?
> > For this to work correctly in the scripts, you have to delete those
blank
> > lines between the lines of commands.
> > I sure hope that you're not getting confused by all of this.
> > But when you copy and paste the scripts shown, there should be, NO,
blank
> > lines between any of the script commands. Jack
> > ----- Original Message -----
> > From: "Andy Logue" <andy@xxxxxxxxxxxxxxxxxxxxxxxxx>
> > To: <jfw@xxxxxxxxxxxxx>
> > Sent: Thursday, January 06, 2005 4:06 PM
> > Subject: Re: Script to change start up message of jaws
> >
> >
> >> Hi Belinda
> >>
> >>
> >> I have copied and pasted it below - but I've only set it up to say hi
> >> there
> >> and tell me the date and time.
> >>
> >> t_app_start, cmsgAppStart1_L, cmsgAppStart1_S)
> >>
> >> SayString("Hello there, Today is")
> >>
> >> Say ( SysGetDate(), ot_string)
> >>
> >> Say (SysGetTime(), ot_string)
> >>
> >> endIf
> >>
> >> endIf ; DefaultFirstTime == 0
> >>
> >>
> >>
> >>
> >>
> >> Good luck.
> >>
> >>
> >>
> >> Andy
> >>
> >> ----- Original Message -----
> >> From: "Belinda Collins" <collinsbelinda@xxxxxxxxxxxxx>
> >> To: <jfw@xxxxxxxxxxxxx>
> >> Sent: Thursday, January 06, 2005 8:40 PM
> >> Subject: Re: Script to change start up message of jaws
> >>
> >>
> >>> Could someone send a copy of exactly how the text will appear after
it
> >>> has
> >>> been pasted? For some reason, I keep getting an error message about
> >>> unexpected word autostart when I have followed all instructions. So I
> >>> guess
> >>> I am still doin something wrong, even after removing the greater
signs.
> >>> ----- Original Message -----
> >>> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
> >>> To: <jfw@xxxxxxxxxxxxx>
> >>> Sent: Thursday, January 06, 2005 1:06 PM
> >>> Subject: Re: Script to change start up message of jaws
> >>>
> >>>
> >>>> Here are the scripts given to me.
> >>>>
> >>>>
> >>>>
> >>>> If you would like for Jaws to give you the time and date at startup,
do
> >>>> the
> >>>>
> >>>> following.
> >>>>
> >>>> 1 press insert+0.
> >>>>
> >>>> 2 press ctrl+L.
> >>>>
> >>>> 3 press the letter B, as in boy.
> >>>>
> >>>> 4 up arrow untill you hear autostart.
> >>>>
> >>>> 5 press enter.
> >>>>
> >>>> 6 down arrow untill you find the following 2 lines.
> >>>>
> >>>> endIf
> >>>>
> >>>> endIf ; DefaultFirstTime == 0
> >>>>
> >>>> 7 just above the line, EndIf, paste in the following. Replace Name
with
> >>>> your
> >>>> own.
> >>>>
> >>>>
> >>>>
> >>>> 8. Alt F4 out of there and tell it yes, to save the changes. Now,
> >>>> here's
> >>>> what you copy, just as it's written here. Don't forget to put your
own
> >>>> name
> >>>> in place of the worde Name.
> >>>>
> >>>>
> >>>>
> >>>> SayString("Hello Name, Today is")
> >>>>
> >>>> Say ( SysGetDate(), ot_string)
> >>>>
> >>>> Say (SysGetTime(), ot_string)
> >>>>
> >>>> SayString("Have a great day!")
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>>> To unsubscribe from this mailing list, send a message to
> >>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
> >>>> line.
> >>>> Archives located at: //www.freelists.org/archives/jfw
> >>>>
> >>>> If you have any concerns about the list, post received from the list,
> >>>> or
> >>>> the way the list is being run, do not post them to the list. Rather
> >>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>>
> >>> --
> >>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>> To unsubscribe from this mailing list, send a message to
> >>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
> >>> Archives located at: //www.freelists.org/archives/jfw
> >>>
> >>> If you have any concerns about the list, post received from the list,
or
> >>> the way the list is being run, do not post them to the list. Rather
> >>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the list,
or
> >> the way the list is being run, do not post them to the list. Rather
> >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather contact
the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
