RE: JFW/PROGRAMMING
- From: Nicholas Cordilione <Nicholas.Cordilione@xxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Mon, 18 Apr 2011 09:20:24 -0400
Tom, & others: I think the vintage text to speech unit you are talking
about was called "pcsaid"
thanks.
Nick Cordilione
Endicott Interconnect Technologies
Department #0040 (internal/vendor tool gage calibration recall services)
Phone: (607) 755-2294.
Internal pager: (607) 239-3990
External pager: (607) 239-3990
"Tom Lange"
<trlange@pacbell.
net> To
Sent by: <jfw@xxxxxxxxxxxxx>
jfw-bounce@freeli cc
sts.org
Subject
RE: JFW/PROGRAMMING
04/16/2011 11:46
AM
Please respond to
jfw@xxxxxxxxxxxxx
Hi,
I saw one of these devices back in 1979, if memory serves. I was working
in one of IBM’s L.A. offices and my boss and I flew up to San Jose, where
Bob LaGrone, an assembly programmer and fellow IBMer, had one. IBM called
it the “SAID” device. S A I D stood for Synthetic Audio Interface Driver.
It was very cool and I could have gotten one pretty easily, but as I
mentioned in an earlier post, it could read the ebcdic character set but
not the APL character set which I used for programming.
Tom
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Bob W
Sent: Friday, April 15, 2011 7:36 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: JFW/PROGRAMMING
Yeah, I remember those beauties. You had speech from the moment you turned
the power on.
They weren't very versatile but they were quite a work horse.
Don't remember what they were called.
I always wished someone would build something like that for pcs.
Bob
"Those who are too smart to engage in politics are punished by being
governed by those who are dumber." Aristotle
----- Original Message -----
From: George Marshall
To: jfw@xxxxxxxxxxxxx
Sent: Friday, April 15, 2011 10:39 AM
Subject: Re: JFW/PROGRAMMING
Tom:
I am surprised IBM didn't give you one of there terminals with speech. I
also programmed on IBM 360,370 and 9000's. I think about 1982 IBM
developed a terminal with speech, had a numeric like pad attached with a
cord used to control reading of the screen.
George R. Marshall
marshall.geoma4@xxxxxxxxx
----- Original Message -----
From: Tom Lange
To: jfw@xxxxxxxxxxxxx
Sent: Thursday, April 14, 2011 11:51 PM
Subject: Re: JFW/PROGRAMMING
Hi,
I wish I'd known about JAWS back in the Eighties, it might have made life
easier for me in some respects. I did mainframe programming for IBM from
1978 to 1994 in a VM environment, programming using the APL programming
language up until around 1987 or so. After that I programmed using Rexx,
which was very English-like.
I didn't know about screen reading solutions for the PC until 1994, so all
through that time I was at IBM, I used an Optacon to read the screen.
That was actually pretty cool, if a bit inefficient.
Tom
----- Original Message -----
From: Bob W
To: jfw@xxxxxxxxxxxxx
Sent: Thursday, April 14, 2011 8:20 AM
Subject: Re: JFW/PROGRAMMING
Hi Prakash.
I am retired now, but was a mainframe programmer from the early seventies
to the late 1990s. I used jaws from the early 80s to my retirement. I
don't think I could have done programming without it.
What you are proposing--going from a visual programmer to a nonvisual
programmer--is a daunting, but not impossible, challenge.
I suspect that you do not know Braille. Knowledge of Braille and an
80-cell display would be a great tool to have in your arsenal. You don't
need to learn literary Braille, or even grade two Braille (though this
might be helpful. But, I would suggest that you emphasize learning
computer Braille, which in some ways is superior to literary Braille.
As I said earlier, your challenges may seem daunting, but they can also
be fun, and they may enhance your creativity.
Good luck, and when you run into problems, this list is a great place to
seek answers.
Bob
A learning experience is one of those things that says, 'You know that
thing you just did? Don't do that.' Douglas Adams
----- Original Message -----
From: john.falter
To: jfw@xxxxxxxxxxxxx
Sent: Wednesday, April 13, 2011 11:04 PM
Subject: Re: JFW/PROGRAMMING
I programmed in assembly language and Cobol for 8 years using JAWS..
----- Original Message -----
From: PRAKASH P
To: JFW@xxxxxxxxxxxxx
Cc: PRAKASH P
Sent: Wednesday, April 13, 2011 10:42 AM
Subject: JFW/PROGRAMMING
I HAVE RECENTLY COME TO A POINT WHERE I CANNOT DO ANYTHING VISUALLY ON
THE COMPUTER SCREEN.
I HAVE BEEN USING zOOMtEXT AUDIO EFFECTIVELY UNTIL NOW. But now I am
told JFW is the way to go.
Can someone give me a good view/opinion of how effective/efficient
would it b to do programming for a living with or without JFW.
I have 20 years of programming experience with MS environments being the
latest. I am able to read all ctooll tip based text and the program
text itself but not sure if I can compete with
The visually enhanced set. I know I have much learning to do but I
would like a seasoned person to give a sense of whats possible.
I am a good learner if not a speedy one.
I am trying to figure out if I should or should not give up on serious
implementation responsibilities.
Thanks for any and all input I can get.
Prakash
Prakash
This email and any attachments are intended solely for the use of
the individual or entity to whom it is addressed and may be
confidential and/or privileged.
If you are not one of the named recipients or have received this
email in error,
(i) you should not read, disclose, or copy it,
(ii) please notify sender of your receipt by reply email and
delete this email and all attachments,
(iii) Dassault Systemes does not accept or assume any liability or
responsibility for any use of or reliance on this email.
For other languages, go to
http://www.3ds.com/terms/email-disclaimer
$U�zV�y�b�K hh��Z��m����
�睢k ������r��I���ا�f��)��+-��i��b��-��݅�&�X��)ߡ�"��+��h����+az7ar��b��ا���rب��見-jg��� ��azX��ǧv+m�7�~���+-���N�����r��y����b�f��)��+-���jg��� ���·���-~���+-����+a����n�˛���m觶����r�b��+r�z�hq�^u�a���
0~���+-�����܆+���
mz�ڶ+�j�!����Z�m����v�nW��o�d������0���㝻�f�����Z�����'q�籦���azX���,���z+�u����^�+-��a{�����b����
���'��h��azkh����Qj�^��'��-����h�w�j����f�{ �祊�l��
Other related posts:
