[iyonix-support] Re: Screen does not come up after booting
- From: Stefan Bellon <sbellon@xxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Sun, 10 Jun 2007 21:41:45 +0200
David J. Ruck wrote:
> On 10 Jun 2007 Stefan Bellon <sbellon@xxxxxxxxxx> wrote:
> > the Iyonix X100 of my father has a problem since its last powerdown
> > cycle: When turning on, it normally boots up, you can hear from the
> > beeps and see from the hard disc lights and you can even shut down
> > the computer with Ctrl-Shift-F12 after it booted, but there is no
> > video signal at all.
> Is the monitor;
> a) turned on before the computer
> b) turned on after the computer
> c) on standbye
Turned on before the computer.
BTW: Could this be a PSU problem? When my Iyonix was at that age, the
PSU failed, but this resulted in the network card not working correctly
and sometimes the hard disc giving trouble. Before I refitted the
graphic card in my father's X100, the Iyonix booted everytime just
fine, just no video signal. Unluckily the Iyonix didn't like me
refitting the graphic card. Hm.
Greetings,
Stefan
--
Stefan Bellon
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
