Working with an outside PCB assembly contractor...they need pick/place data for the boards they're going to build for us. Mostly no problem...extract the location (origin and/or centroid) for all components/symbols on the board. However, we place our board fiducials as mechanical symbols, and these don't show up in the extracta output using the following script: component # comp_height comp_part_number comp_device_label refdes comp_package sym_center_x sym_center_y sym_x sym_y sym_rotate refdes_sort # End Question is, how do I get the x/y location data for the fiducials, which the assembler needs for alignment??? /s/jar (alan.ritter@xxxxxxxxxx) http://www.mtritter.org Bausch & Lomb 150 Years of Perfecting Vision, Enhancing Life (TM) EMAIL DISCLAIMER Please Note: The information contained in this message may be privileged and confidential, protected from disclosure, and/or intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, distribution, copying or other dissemination of this communication is strictly prohibited. If you received this communication in error, please immediately reply to the sender, delete the message and destroy all copies of it. Thank You ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------