[PCB_FORUM] Re: Extracting Locations for Mechanical Symbols?
- From: Don.Kost@xxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 16 Jun 2004 11:37:03 -0400
Alan,
Check out solution number 11098880 on Sourcelink. There is a example
extract command file there.
Don ...........................
anthony.cosentino
@tekelec.com
Sent by: To
icu-pcb-forum@xxxxxxxxxxxxx
cc
06/16/2004 11:35
AM Subject
[PCB_FORUM] Re: Extracting
Locations for Mechanical Symbols?
Please respond to
icu-pcb-forum@fre
elists.org
Alan,
Attached is an extract command file for both the UniCAM & CircuitCAM
formats. As stated previously by another Forum member you should talk with
your assembly house to see what format they prefer. More than likely they
have an extract command file they will share with you. Nevertheless, here
is one that will include Fiducials with the placement data.
From the command line you can type the following:
shell extracta boardname assy_extract.txt pp.txt
assy_extract.txt = command file
pp.txt = output pick & place data
(See attached file: assy_extract.txt)
Note: make sure that the command file is in your working directory.
Thanks
Tony Cosentino
Tekelec - PCB Design Engineer
5200 Paramount Parkway
Morrisville, NC 27560
919-460-3656 Work
919-414-2083 Cell
anthony.cosentino@xxxxxxxxxxx
www.tekelec.com
"Ritter, Alan"
Sent by: To:
icu-pcb-forum@xxxxxxxxxxxxx
cc:
Subject: [PCB_FORUM]
Extracting Locations for Mechanical Symbols?
06/16/2004 09:53
AM
Please respond
to icu-pcb-forum
Working with an outside PCB assembly contractor...they need pick/place data
for the boards they're going to build for us. Mostly no problem...extract
the location (origin and/or centroid) for all components/symbols on the
board.
However, we place our board fiducials as mechanical symbols, and these
don't
show up in the extracta output using the following script:
component
#
comp_height
comp_part_number
comp_device_label
refdes
comp_package
sym_center_x
sym_center_y
sym_x
sym_y
sym_rotate
refdes_sort
#
End
Question is, how do I get the x/y location data for the fiducials, which
the
assembler needs for alignment???
/s/jar (alan.ritter@xxxxxxxxxx)
http://www.mtritter.org
Bausch & Lomb
150 Years of Perfecting Vision, Enhancing Life (TM)
EMAIL DISCLAIMER
Please Note: The information contained in this message may be privileged
and
confidential, protected from disclosure, and/or intended only for the use
of
the individual or entity named above. If the reader of this message is not
the intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
disclosure, distribution, copying or other dissemination of this
communication is strictly prohibited. If you received this communication in
error, please immediately reply to the sender, delete the message and
destroy all copies of it.
Thank You
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
(See attached file: assy_extract.txt)
Other related posts:
