[PCB_FORUM] Re: Bottom Side SMT Testpad Definition
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 25 Jan 2008 11:49:51 -0600
Dave,
Oops, here is the "Parameters" tab, you need Type to be "Blind/Buried":
Should work for you now!
Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado
amd.com
gary.macindoe@xxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Schaefer
Sent: Friday, January 25, 2008 10:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Bottom Side SMT Testpad Definition
Gary,
Attempting to define a single layer padstack per your 2nd option ...
Pad_Designer only allows features on "BEGIN LAYER" for a Type Single
padstack - do I need to define the pad as a Type Through and only define
pad shapes on "END LAYER" and "SOLDERMASK BOTTOM"?
Thanks,
Dave
>
> From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxx>
> Date: 2008/01/25 Fri AM 09:54:14 CST
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Bottom Side SMT Testpad Definition
>
>
Dave Schaefer
dave.schaefer@xxxxxxx
Other related posts:
