[HUG] Re: A12 backs for SWC/M

  • From: Antonio Garcia Russell <antoniorussell@xxxxxxxxxxxxxx>
  • To: hasselblad@xxxxxxxxxxxxx
  • Date: Thu, 16 Aug 2007 09:56:46 +0200

Thanks all for the feedback. I opted for the new back in the end. The current back I use with the SWC/M does not have a darkslide holder and, holding the camera as suggested in the Hasselblad manual which seems the most logical way to hold it, my thumb end up resting on the upper right hand side of the film magazine looking from the rear. Looking at photos of the new A12s it doesnt look as though the darkslide hølder adds that much to the rear....



Saludos,
Antonio




On 16 Aug 2007, at 02:14, Bob Adler wrote:

Man, how bizzare is that?? Next thing you know there'll be some crazy camera that you have to press the shutter down half way before you remove the dark slide and then put the dark slide back in before you cock the lens again...
;-)

Jim Brick <jim@xxxxxxxxx> wrote:
The SWC shutter release is on the top so the left index finger won't
work


Bob Adler
Palo Alto, CA
http://www.raflexions.com

Other related posts: