Tom, Thanks, this is exactly the info I needed. Russ >-----Original Message----- >From: foxboro-bounce@xxxxxxxxxxxxx >[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Badura, Tom >Sent: Monday, March 25, 2013 4:52 PM >To: foxboro@xxxxxxxxxxxxx >Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 >aspect ratios - any progress? > >Russ, >We are also at 8.4.3 and installed Foxview/Foxdraw 10.2.4 on >our system a few months ago. We do not currently have any >16:9 displays, but will allow us to use them if/when we do. >FV will convert existing 4:3 to >16:9 if you want, but otherwise it works just like earlier >versions. I think there are several options when converting, >but essentially the displays stay the same and just give you >some extra real estate to work with on the side. The only >thing I recall was we also had to upgrade our version of IACC >to work with the new FV. > >See B0700RJ FV 10.2.4 Release notes for all the details. > > >Tom Badura >Plastics Engineering Company >tbadura@xxxxxxxxxx > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave