Matt, Thanks, I was already aware of the configuration switch that determined how FoxView handled a wide monitor. I want to be able to use the extra real estate. Russ >-----Original Message----- >From: foxboro-bounce@xxxxxxxxxxxxx >[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kinsinger, Matthew R >Sent: Monday, March 25, 2013 5:27 PM >To: foxboro@xxxxxxxxxxxxx >Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 >aspect ratios - any progress? > >I also forgot, for several years now, there has been a >parameter you set on the workstation, that determines if it >stretches existing displays or puts light gray sidebars in, to >fill the void on widescreen displays. > >Matt Kinsinger >mkinsinger@xxxxxxx >330-825-1208 > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave