Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect ratios - any progress?
- From: "Landry, Scott" <Scott.Landry@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 25 Mar 2013 21:21:01 -0400
Yep,
FAQ513
FV_KEEPASPECTRATIO= N
add to init.user
Note that minor graphic distortion may occur in full-screen mode because the
original 3x4 ratio is not maintained, distorsion would only be seen in
full screen mode.
Regards,
Scott L. Landry
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Kinsinger, Matthew R [mkinsinger@xxxxxxx]
Sent: Monday, March 25, 2013 4:27 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect ratios -
any progress?
I also forgot, for several years now, there has been a parameter you set on the
workstation, that determines if it stretches existing displays or puts light
gray sidebars in, to fill the void on widescreen displays.
Matt Kinsinger
mkinsinger@xxxxxxx
330-825-1208
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Bowman, Mark
Sent: Monday, March 25, 2013 4:30 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect ratios -
any progress?
We have the wider version of FoxDraw / FoxView.
The older screens display with blank on the right edge of the monitor. When
you open the screen in FoxDraw it will convert to the new style. It is the
same as the original screen with empty space to the right. We are slowly
converting our graphics over to take advantage of that space.
Mark
Mark Bowman
Treatment Plant Systems Analyst
City of Sparks - Truckee Meadows Water Reclamation Facility
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Russ Kaiser
Sent: Monday, March 25, 2013 11:59 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect ratios -
any progress?
Thanks for the info, Matt. We're at 8.4.3, FoxDraw version 10.1. It
would be nice to know you could take advantage of the FVFD changes without
upgrading to 8.8. I'm interested in how displays that were developed using
the 100 x 75 FoxDraw matrix display. Do they get stretched, centered, or
does one corner get pinned. When you develop, what are the numeric
"dimensions" of the new base display in FoxDraw?
Russ
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx
>[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kinsinger, Matthew R
>Sent: Monday, March 25, 2013 1:09 PM
>To: foxboro@xxxxxxxxxxxxx
>Subject: Re: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect
>ratios - any progress?
>
>The new Version of FVFD you need at V8.8 includes it. Not sure of the
>pre 8.8 versions that act the same way. Just a caveat, displays
>modified in the new FVFD are not readable in most of the old FVFD
>versions. So if you have multiple versions running in the plant, you
>need to be careful where you make changes to send to older areas.
>
>Matt Kinsinger
>mkinsinger@xxxxxxx
>330-825-1208
>
>
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx
>[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Russ Kaiser
>Sent: Monday, March 25, 2013 11:41 AM
>To: foxboro@xxxxxxxxxxxxx
>Subject: [foxboro] FoxView - FoxDraw using 16:9 or 16:10 aspect ratios
>- any progress?
>
>I haven't been too attentive for the last year. Has there been any
>progress for the support of truly utilizing wide screen displays using
>FoxView/FoxDraw?
>
>Russ
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
