Re: [foxboro] FW: WP51B not booting up after restore
- From: Kashif Ijaz <kashifijaz93@xxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 21 Jan 2008 12:12:02 +0500
When I give command
fsck /dev/rsd06a
I receive a message " Can't stat /dev/rsd06a"
I have gone to /mnt/etc as suggested by you and checked "hostname.le0" and
"nodename". Both are giving correct letterbug "61WP32".
The DNBI green LED is blinking at a constant speed. The Red LED is constant ON.
When I gave "boot cdrom" command, there is also a message coming
"le0: No carrier - cable disconnected or hub link test disabled?"
Can you help further.
Regards,
Kashif Ijaz
INTECH Process Automation.> From: mostafa_atatork@xxxxxxxxxxx> To:
foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] FW: WP51B not booting up after
restore> Date: Sat, 19 Jan 2008 11:01:14 +0000> > Dear KAshif> you can try >
boot cdrom> fsck /dev/rsd06a> mount -o rw -F ufs /dev/sd0a /mnt> cd /mnt/etc>
and check hostname.le0 and node name if they are empty write your letterbug in
those 2 filesMostafa> From: kashifijaz93@xxxxxxxxxxx> To:
foxboro@xxxxxxxxxxxxx> Subject: [foxboro] FW: WP51B not booting up after
restore> Date: Sat, 19 Jan 2008 15:46:20 +0500> > > > > > > Dear All,> The hard
disk was taken from another system. I did nor perform ia_install before dd
command. After your email, I booted from CDROM and did ia_install. Then
restored using dd command as we had backup on 8mm tape done by dd command But
after restoring, I am facing same problem with following messages Configuring
network interface:ifconfig:plumb:le0:no such interfaceifconfig:SIOCSIFFLAGS:no
such interface le0:no such interface le0Hostname 61WP32 WARNING :
/usr/sbin/fsck not found ..................... Can you suggest any solution. I
have connected the "Parallel/AUI ethernet port" and "Serial port A" to the
powered up DNBI using the same letterbug (61WP32). Regards, Kashif IjazINTECH
Process Automation.>> Subject: Re: [foxboro] WP51B not booting up after
restore> Date: Mon, 14 Jan 2008 05:56:31 -0500> From:
russ.boulay@xxxxxxxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> > What was the
baseline software on the hard drive.?> > You must:> Perform ia_install with
day0 cd to partition the > drive and load I/A baseline.> Then restore your
tape..> ________________________________> > From: foxboro-bounce@xxxxxxxxxxxxx
on behalf of Kashif Ijaz> Sent: Mon 1/14/2008 5:14 AM> To:
foxboro@xxxxxxxxxxxxx> Subject: [foxboro] WP51B not booting up after restore> >
> > I restored a WP51B (letterbug 61WP32) using a new hard disk ( 1.05 GB)
using dd command from 8 mm tape. I understand that WP51B doesn't boot up
without powered up DNBI using same letterbug as WP. I have connected the WP51B
Parallel/AUI ethernet port and Serial Port A to active DNBI with letterbug
61WP32. but the machine doesn't boot but goes to ok prompt with following
messages.> > Hostname : 61WP32> mount : /dev/dsk/c0t3d0s6. no such > device>
/sbin/swapadd : expr: not found> /sbin/swapadd : /usr/sbin/swap : not found> >
> When I use "probe-scsi-all" command at ok prompt, it shows the hard disk as>
> Target 3> unit 0 Disk SEAGATE ST31200N SUN1.05872200937891> > Can any one
suggest how to solve this problem.> > > Regards,> > Kashif Ijaz> INTECH Process
Automation> _________________________________________________________________>
Express yourself instantly with MSN Messenger! Download today it's FREE!>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/> > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe: mailto:fo>
xboro-request@xxxxxxxxxxxxx?subject=leave> > > > > > > * Confidentiality
Notice:> This e-mail and any associated files are intended solely for the
individual or entity to whom they are addressed. Please do not copy it or use
it for any purposes, or disclose its contents to any othe> r person. Further,
this e-mail and any associated files may be confidential and further may be
legally privileged. This email is from the Invensys Process Systems business
unit of Invensys plc which is a company registered in England and Wales with
its registered office at Portland House, Bressenden Place, London, SW1E 5BF
(Registered number 166023). For a list of European legal entities within the
Invensys Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.>
> If you have received this e-mail in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this message from
your sys> tem. Thank you for your co-operation. You may contact our Helpdesk on
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail
and any attachments thereto may be subject to the terms of any agreements
between Invensys (and/or its subsidiaries and affiliates) and > the recipient
(and/or its subsidiaries and affiliates).> > > -- No attachments (even text)
are allowed --> -- Type: application/ms-tnef> -- File: winmail.dat> > > > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave> > > > > Express yourself
instantly with MSN Mess> enger! MSN Messenger >
_________________________________________________________________> Express
yourself instantly with MSN Messenger! Download today it's FREE!>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/> > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave> >
_________________________________________________________________> Connect and
share in new ways with Windows Live.>
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008> >
> _______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave>
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
