I restored a WP51B (letterbug 61WP32) using a new hard disk ( 1.05 GB) using dd command from 8 mm tape. I understand that WP51B doesn't boot up without powered up DNBI using same letterbug as WP. I have connected the WP51B Parallel/AUI ethernet port and Serial Port A to active DNBI with letterbug 61WP32. but the machine doesn't boot but goes to ok prompt with following messages. Hostname : 61WP32 mount : /dev/dsk/c0t3d0s6. no such device /sbin/swapadd : expr: not found /sbin/swapadd : /usr/sbin/swap : not found When I use "probe-scsi-all" command at ok prompt, it shows the hard disk as Target 3 unit 0 Disk SEAGATE ST31200N SUN1.05872200937891 Can any one suggest how to solve this problem. Regards, Kashif Ijaz INTECH Process Automation _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave