Re: [foxboro] WP51B not booting up after restore
- From: "Boulay, Russ" <russ.boulay@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 14 Jan 2008 05:56:31 -0500
What was the baseline software on the hard drive.?
You must:
Perform ia_install with day0 cd to partition the drive and load I/A baseline.
Then restore your tape..
________________________________
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Kashif Ijaz
Sent: Mon 1/14/2008 5:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WP51B not booting up after restore
I restored a WP51B (letterbug 61WP32) using a new hard disk ( 1.05 GB) using dd
command from 8 mm tape. I understand that WP51B doesn't boot up without powered
up DNBI using same letterbug as WP. I have connected the WP51B Parallel/AUI
ethernet port and Serial Port A to active DNBI with letterbug 61WP32. but the
machine doesn't boot but goes to ok prompt with following messages.
Hostname : 61WP32
mount : /dev/dsk/c0t3d0s6. no such device
/sbin/swapadd : expr: not found
/sbin/swapadd : /usr/sbin/swap : not found
When I use "probe-scsi-all" command at ok prompt, it shows the hard disk as
Target 3
unit 0 Disk SEAGATE ST31200N SUN1.05872200937891
Can any one suggest how to solve this problem.
Regards,
Kashif Ijaz
INTECH Process Automation
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or
entity to whom they are addressed. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. Further, this e-mail
and any associated files may be confidential and further may be legally
privileged. This email is from the Invensys Process Systems business unit of
Invensys plc which is a company registered in England and Wales with its
registered office at Portland House, Bressenden Place, London, SW1E 5BF
(Registered number 166023). For a list of European legal entities within the
Invensys Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
If you have received this e-mail in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this message from
your system. Thank you for your co-operation. You may contact our Helpdesk on
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail
and any attachments thereto may be subject to the terms of any agreements
between Invensys (and/or its subsidiaries and affiliates) and the recipient
(and/or its subsidiaries and affiliates).
-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » Re: [foxboro] WP51B not booting up after restore
