[foxboro] FW: WP51B not booting up after restore
- From: Kashif Ijaz <kashifijaz93@xxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Sat, 19 Jan 2008 15:46:20 +0500
Dear All,
The hard disk was taken from another system. I did nor perform ia_install
before dd command. After your email, I booted from CDROM and did ia_install.
Then restored using dd command as we had backup on 8mm tape done by dd command
But after restoring, I am facing same problem with following messages
Configuring network interface:ifconfig:plumb:le0:no such
interfaceifconfig:SIOCSIFFLAGS:no such interface le0:no such interface
le0Hostname 61WP32 WARNING : /usr/sbin/fsck not found .....................
Can you suggest any solution. I have connected the "Parallel/AUI ethernet port"
and "Serial port A" to the powered up DNBI using the same letterbug (61WP32).
Regards, Kashif IjazINTECH Process Automation.> Subject: Re: [foxboro] WP51B
not booting up after restore> Date: Mon, 14 Jan 2008 05:56:31 -0500> From:
russ.boulay@xxxxxxxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> > What was the
baseline software on the hard drive.?> > You must:> Perform ia_install with
day0 cd to partition the drive and load I/A baseline.> Then restore your
tape..> ________________________________> > From: foxboro-bounce@xxxxxxxxxxxxx
on behalf of Kashif Ijaz> Sent: Mon 1/14/2008 5:14 AM> To:
foxboro@xxxxxxxxxxxxx> Subject: [foxboro] WP51B not booting up after restore> >
> > I restored a WP51B (letterbug 61WP32) using a new hard disk ( 1.05 GB)
using dd command from 8 mm tape. I understand that WP51B doesn't boot up
without powered up DNBI using same letterbug as WP. I have connected the WP51B
Parallel/AUI ethernet port and Serial Port A to active DNBI with letterbug
61WP32. but the machine doesn't boot but goes to ok prompt with following
messages.> > Hostname : 61WP32> mount : /dev/dsk/c0t3d0s6. no such device>
/sbin/swapadd : expr: not found> /sbin/swapadd : /usr/sbin/swap : not found> >
> When I use "probe-scsi-all" command at ok prompt, it shows the hard disk as>
> Target 3> unit 0 Disk SEAGATE ST31200N SUN1.05872200937891> > Can any one
suggest how to solve this problem.> > Regards,> > Kashif Ijaz> INTECH Process
Automation> _________________________________________________________________>
Express yourself instantly with MSN Messenger! Download today it's FREE!>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/> > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave> > > > > > > *
Confidentiality Notice:> This e-mail and any associated files are intended
solely for the individual or entity to whom they are addressed. Please do not
copy it or use it for any purposes, or disclose its contents to any other
person. Further, this e-mail and any associated files may be confidential and
further may be legally privileged. This email is from the Invensys Process
Systems business unit of Invensys plc which is a company registered in England
and Wales with its registered office at Portland House, Bressenden Place,
London, SW1E 5BF (Registered number 166023). For a list of European legal
entities within the Invensys Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.>
> If you have received this e-mail in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this message from
your system. Thank you for your co-operation. You may contact our Helpdesk on
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail
and any attachments thereto may be subject to the terms of any agreements
between Invensys (and/or its subsidiaries and affiliates) and the recipient
(and/or its subsidiaries and affiliates).> > > -- No attachments (even text)
are allowed --> -- Type: application/ms-tnef> -- File: winmail.dat> > > > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave>
Express yourself instantly with MSN Messenger! MSN Messenger
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] FW: WP51B not booting up after restore
