Selected a FBM242 from the template tool box, ECB shows hardware type 242, software type 5. . On Wed, Oct 5, 2011 at 7:44 PM, Landry, Scott <Scott.Landry@xxxxxxxxxxxx>wrote: > > > Check your hardware and software type in the ECB created for the FBM242 > > ________________________________________ > From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On > Behalf Of Dominic Mancl [dmancl@xxxxxxxxxxxxxxxxxxxxx] > Sent: Wednesday, October 05, 2011 11:51 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Adding an FBM to a FCP270 Infusion > > I haven't had to add any hardware yet so I apologize if this question > seems > naive. I need to add a FBM242 to an new FCP270. It was added in Archestra > IDE and is deployed and shows up in Infusion System Manager. The > communication to the FCP270 shows up fine but the individual module is not > communicating. The FCP270 was previously configured for the system, do I > need to run the commit procedures to add the FBM242 in order to get it > working properly? > Thank you, > > Dominic Mancl > Controls Designer > Trident Automation > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > *** Confidentiality Notice: This e-mail, including any associated or > attached files, is intended solely for the individual or entity to which it > is addressed. This e-mail is confidential and may well also be legally > privileged. If you have received it in error, you are on notice of its > status. Please notify the sender immediately by reply e-mail and then delete > this message from your system. Please do not copy it or use it for any > purposes, or disclose its contents to any other person. This email comes > from a division of the Invensys Group, owned by Invensys plc, which is a > company registered in England and Wales with its registered office at 3rd > Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For > a list of European legal entities within the Invensys Group, please go to > http://www.invensys.com/en/legal/default.aspx. > > You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail > reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be > subject to the terms of any agreements between Invensys (and/or its > subsidiaries and affiliates) and the recipient (and/or its subsidiaries and > affiliates). > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave