Re: [foxboro] Adding an FBM to a FCP270 Infusion
- From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 5 Oct 2011 13:55:17 -0400
Does that mean you have 5 terminators installed? 2 on FCP ports and 3 on the 3
unused expansion? If so remove terms from the expansion ports. Make sure 8 pos
baseplate is terminated.
--------------------------
Sent using BlackBerry
----- Original Message -----
From: Dominic Mancl [mailto:dmancl@xxxxxxxxxxxxxxxxxxxxx]
Sent: Wednesday, October 05, 2011 01:06 PM
To: foxboro@xxxxxxxxxxxxx <foxboro@xxxxxxxxxxxxx>
Subject: Re: [foxboro] Adding an FBM to a FCP270 Infusion
I verified baseplate identification is 0, FBM is in slot 1 Letterbug is
PB0201. In System Manager it shows Last Cable Access as both failed. At this
time I have the FCP/FEM baseplate and one 8-slot baseplate, with one cable
from Expanded Field Bus 1 to the 8-slot baseplate and all other fieldbus
connections terminated.
On Wed, Oct 5, 2011 at 11:59 AM, Boulay, Russ <Russ.Boulay@xxxxxxxxxxxx>wrote:
> Your procedure is enough to get an FBM running. So I guess is letterbug
> correct for the slot and baseplate you are in. Most users no longer use
> commit for FBM"s
> --------------------------
> Sent using BlackBerry
>
>
> ----- Original Message -----
> From: Dominic Mancl [mailto:dmancl@xxxxxxxxxxxxxxxxxxxxx]
> Sent: Wednesday, October 05, 2011 12:51 PM
> To: foxboro@xxxxxxxxxxxxx <foxboro@xxxxxxxxxxxxx>
> Subject: [foxboro] Adding an FBM to a FCP270 Infusion
>
> I haven't had to add any hardware yet so I apologize if this question seems
> naive. I need to add a FBM242 to an new FCP270. It was added in Archestra
> IDE and is deployed and shows up in Infusion System Manager. The
> communication to the FCP270 shows up fine but the individual module is not
> communicating. The FCP270 was previously configured for the system, do I
> need to run the commit procedures to add the FBM242 in order to get it
> working properly?
> Thank you,
>
> Dominic Mancl
> Controls Designer
> Trident Automation
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or
> attached files, is intended solely for the individual or entity to which it
> is addressed. This e-mail is confidential and may well also be legally
> privileged. If you have received it in error, you are on notice of its
> status. Please notify the sender immediately by reply e-mail and then delete
> this message from your system. Please do not copy it or use it for any
> purposes, or disclose its contents to any other person. This email comes
> from a division of the Invensys Group, owned by Invensys plc, which is a
> company registered in England and Wales with its registered office at 3rd
> Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
> a list of European legal entities within the Invensys Group, please go to
> http://www.invensys.com/en/legal/default.aspx.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be
> subject to the terms of any agreements between Invensys (and/or its
> subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
> affiliates).
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
