Re: [foxboro] Adding an FBM to a FCP270 Infusion
- From: Dominic Mancl <dmancl@xxxxxxxxxxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 5 Oct 2011 12:06:26 -0500
I verified baseplate identification is 0, FBM is in slot 1 Letterbug is
PB0201. In System Manager it shows Last Cable Access as both failed. At this
time I have the FCP/FEM baseplate and one 8-slot baseplate, with one cable
from Expanded Field Bus 1 to the 8-slot baseplate and all other fieldbus
connections terminated.
On Wed, Oct 5, 2011 at 11:59 AM, Boulay, Russ <Russ.Boulay@xxxxxxxxxxxx>wrote:
> Your procedure is enough to get an FBM running. So I guess is letterbug
> correct for the slot and baseplate you are in. Most users no longer use
> commit for FBM"s
> --------------------------
> Sent using BlackBerry
>
>
> ----- Original Message -----
> From: Dominic Mancl [mailto:dmancl@xxxxxxxxxxxxxxxxxxxxx]
> Sent: Wednesday, October 05, 2011 12:51 PM
> To: foxboro@xxxxxxxxxxxxx <foxboro@xxxxxxxxxxxxx>
> Subject: [foxboro] Adding an FBM to a FCP270 Infusion
>
> I haven't had to add any hardware yet so I apologize if this question seems
> naive. I need to add a FBM242 to an new FCP270. It was added in Archestra
> IDE and is deployed and shows up in Infusion System Manager. The
> communication to the FCP270 shows up fine but the individual module is not
> communicating. The FCP270 was previously configured for the system, do I
> need to run the commit procedures to add the FBM242 in order to get it
> working properly?
> Thank you,
>
> Dominic Mancl
> Controls Designer
> Trident Automation
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or
> attached files, is intended solely for the individual or entity to which it
> is addressed. This e-mail is confidential and may well also be legally
> privileged. If you have received it in error, you are on notice of its
> status. Please notify the sender immediately by reply e-mail and then delete
> this message from your system. Please do not copy it or use it for any
> purposes, or disclose its contents to any other person. This email comes
> from a division of the Invensys Group, owned by Invensys plc, which is a
> company registered in England and Wales with its registered office at 3rd
> Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
> a list of European legal entities within the Invensys Group, please go to
> http://www.invensys.com/en/legal/default.aspx.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be
> subject to the terms of any agreements between Invensys (and/or its
> subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
> affiliates).
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
